Weight is not the issue, it's moment arm. I think you're stretching it with that size. Rolando

We have not notified anyone yet. We are making quite a few mounts, so you will probably be fine. Clear Skies, Marj Christen Astro-Physics, Inc 11250 Forest Hills Rd Machesney Park, IL

Significant tilt. The QHY600 may be better. Less users reporting issues with those.

Uninstall, reboot, reinstall with AV off. From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Micheal Fields Jr via groups.io <mpfjr@...> Sent: Saturday, December 19, 2020 9:26 PM To:

Turn off your antivirus.

Based on the weight of the OTA + focuser/OAG/guider/FW of 55 lbs, outer diameter of 16" and a total length of 50", a CDK 14 would be well within the "Green" of the Mach 2 capacity chart in both RA and

Hi Michael, This sounds like you may be using a version of the ASCOM platform 6.5 that has the "Transform" bug. The symptom is that all the model's plate solves will have the same plate solve

Hi Woody, PEMPro does not require a really wide FOV. However, PEMPro may fail to find a suitable star if no stars fall within the minimum to maximum brightness range that you define. Using the

Hi Shailesh, PEMPro does not require an ST4 output port to move the mount. The movements for this step are usually accomplished by slewing the telescope to new RA/Dec coordinates via the ASCOM

Hi Wei Hao, for what it's worth, I have tried to initialize the mount with version 6 pro of sky safari pro on the mach2, without the keypad or computer and was unsuccessful. This was before the

Shailesh, I’m sure others more experienced than I will have better replies, but as I recall, I never got my mount and Pempro to work with my main camera and scope. I only got things to work

I am trying to polar align my AP1100 using Pempro's polar wizard. In the step where the wizard tries to determine north/south/east/west I get no mount movement and the imaging fails, I am using the

Mount latitude cannot be changed except after the mount is power-cycled. So, if you get the Lat/Long from the MGBox, you must create a site, then assign that site for mount initialization. Then power

Only have the default windows security stuff. No different than any of my computers including the one that works. But I will turn it all off anyways and see what happens. Thanks

10 Pro. Ray, I checked that box each time. I am going to experiment further on it. BTW, one thing I noticed (unrelated to this issue) is that the "mount location" under the section on the left side

One other thing you might try is temporarily turn off your anti-virus software as it may be blocking the virtual port component from being registered. -Ray Gralak Author of PEMPro Author of APCC

Uninstalling is not going to help. It's because it is *not* installed that you are getting that license request. Make sure the windows account is an administrator account, not just a regular user

Hi Ray, Yes I have done that about 5 times in the last hour. I even used geek uninstaller to make sure it found every trace in the registry and removed it so I could do a fresh install but still no

There is a step in the APCC installer which will install the virtual ports on your computer. If you don't perform that step then you will not get the licensed virtual port components on that computer.

What version of APCC are you running? and is it the same or different version than the PC that works -- Brian Brian Valente portfolio brianvalentephotography.com