Hi Tim, I am using WIN 98

Hi Roland, All items you mention are set correctly. THanks

Joe, I have had this exact same problem with The Sky when using Windows Me, This problem does not exist when using Windows 2000 on the same computer (I have dual boot Win Me/2000). I have reported

jmarietta@... writes: Check your clock time, daylight savings setting (should be 1 now for summer), date and location. If any of these are off, the keypad will calculate the wrong

Hi Folks, I have been using the newest version of the SKY to link with my AP1200 GTO (handcontroller v2.6). Whenever I use the controller to find an object, I get a "object below horizon" error.

Not necessarly true Robin about quality prints. I can re-scale this image up to 20 inches across, output to the LightJet 5000 and get a spectacular photographic quality hardcopy print that

I've imaged with that combination (Traveler + CCD on AP 400GTO). The 400 is impressively capable for a small mount. I've imaged with as much as a C9.25" on it (focal length 2350mm), so the Traveler

I'm not sure I'm convinced. I took that image into Photoshop 6, upscaled it to 20" wide at 144 dpi. On screen it looked soft. I printed a section on an Epson 1200 and wouldn't call the results

Hi, I am on the list for an AP Traveler & 400 GTO mount and plan to use them for colour CCD imaging. Can anyone tell me if there would be any advantage to upgrading to a 600 GTO? The mount will be

To get photographic quality prints of that size you would need a lot more resolution than an ST-10. I think you need medium format film for that size print. Having done a little bit of film imaging

I remember reading posts concerning problems with a AP900 and seem to have encountered a similiar problem. When I startup my AP1200 the keypad display comes up and all seems well at first. I can

I remember reading posts concerning problems with a AP900 and seem to have encountered a similiar problem. When I startup my AP1200 the keypad display comes up and all seems well at first. I can

Carl, It's not a "dumb" question at all. The "autostart" feature will be available in version 3 of the keypad which is mighty close to being done. Probably shouldn't have mentioned it to avoid

Greetings - have decided that what I really want to do is concentrate on creating 18x24" sized deep sky prints w/ my Traveler and hopefully soon AP130. The question is mounts - I'm on the list and

Hi Marj, I'm sorry for the (dumb) question but where do I find the "autostart" option to set it to "yes". I went through the keypad options and the setup for the AP mounts in TheSKY but missed

Thanks to Joe, Terry and Jim for the suggestions. After speaking with both Roland and Jim Kendrick, it appears that I have the bad combination of a weak battery and an older model (IV) of the Dew

Classic symptom of a frozen RA motor. take the cover off the motor gearbox and look to see if the motor shaft is turning, or trying to turn. The servo gives it about 2 seconds and then shuts off all

jcord02@... writes: Classic symptom of a frozen RA motor. take the cover off the motor gearbox and look to see if the motor shaft is turning, or trying to turn. The servo gives it about 2

Notice: If you set the park position, then park with TheSky 5.00.012 and turn the power off (without the keypad plugged in), TheSky will not unpark correctly. Instead, the cursor will point to