Yes on both.

Linda, And did you power cycle the mount and restart APCC? Regards, George George Whitney Astro-Physics, Inc. Phone: 815-222-6538 (direct line) Phone: 815-282-1513 (office) Email:

George, Thanks so much for the response! Unfortunately, that didn’t change things. Here’s a screenshot: Looks like we have things set up like you suggested. The AP1600 has a CP3 if that makes a

Thank you George. I have the same issue. Here’s another question: In the “Park” window under the “Unpark” section, should the “Stop Tracking after unparking” be checked or unchecked

Linda, Two things to do: 1- Open "Edit ASCOM Drive Settings" and expand it to show the 2nd section. Uncheck the "Enable Mount Tracking on Unpark" box; then click OK to exit 2- Open "Edit Initialize

Thanks, Dale! We did, but just tried with it off and it behaves the same way.

Ray Thank you for clearing that up for me.

In the Initialize Mount settings (Settings > Edit Initialize Mount Settings), do you also have the "Set Tracking Rate" checkbox ticked? I don't have my mount connected up at the moment so I can't

Brian, We ship the mounts with a PE curve installed. If you have Absolute Encoders on your 1100 or 1600 mount, then the PE curve is irrelevant as the encoders eliminate PE. I disable the PEM

George My understanding is that our 1600 with absolute encoders do not use PEC, and PEC appears disabled in the mount. Which is fine because of the encoders, but I did want to clarify that I assume

I’m currently part of an imaging team that is using an AP1600 and we’re using APCC. Currently, the initialization is set to “don’t unpark” which is what we want but upon initilization, APCC

Tom, Most welcome! Regards, George George Whitney Astro-Physics, Inc. Phone: 815-222-6538 (direct line) Phone: 815-282-1513 (office) Email: george@...

Great! Thanks

Tom, Yes, our 1100 and 1600 mounts are shipped with a corrected PE curve installed. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-222-6538 (direct line) Phone:

When one purchases a mount, does it include the refined curve? It appears to make a huge difference. Please check out the post in the files here, done by Roland that shows its effects. Tom

Greetings from Switzerland, I am quite a new owner of an AP 1100 GTO and I need some help regarding the below error message that I am getting in APCCafter plate-solving (in APT tool) and then

Hi Bruce, Tracking rate corrections are calculated by the change in the pointing error. The all-sky model's accuracy goes up roughly as the square root of the number of data points in each hemisphere

Hi Wendel, No, the second curve does not include the effects of the first curve. If you want to combine the first and second curves, you would have to merge them on PEMPro's Refine tab, then upload

Hi Dave, I am glad you solved the connection issue! -Ray

Hi, Yes the manual on your site, says to have the counterweight side slightly heavy as well as the camera end in dec. Tom