In that case I’ve got a problem. 30 min ago when I initialized I had the option to select slew 1800 and button 1200 on the the controller and using APCC-Pro. This has been the case since I received

This is so familiar. Years ago, I wasn't able to balance a new heavier load on my Celestron CGEM with the stock counterweight bar and weights. I had the facilities, so the "obvious" solution was to

Tidbit for those whom are interested – I asked one of our most avid users of the NUC here are his comments and I have no inclination of promoting, just sharing knowledge😊: Yes I actually

There is a lot of great information in the GTOCP4 Servo Motor Drive System manual that is posted on the AP1100 product page. Appendix B is titled Power Considerations and has a lot of useful

I have an AP1100 on the way. Any moment now. I plan to use it in my back yard mostly, where AC power is available, but occasionally take it to a dark site with batteries. I redid my batteries and

Slew and Button or just Slew? I only get to select slew at 1800 at 24V. Button is limited to 1200.

Better than $1000! You have the USB2 version so you’ve probably already figured out the connection idiosyncrasies.

Slew and button. You are limited to 1200x if you don’t use 18-24V Clear Skies, Marj Christen Astro-Physics 11250 Forest Hills Road Machesney Park, IL 61115 Phone:

Eric, 18-24V will give you 1800x 12-17V will give you 1200x Clear Skies, Marj Christen Astro-Physics 11250 Forest Hills Road Machesney Park, IL 61115 Phone:

Marj, I really should proof read what I type before I hit send. Atrocious. This is likely just my misunderstanding of how the slew rates work. There is a Slew

He accepted my $800.01 offer, with free shipping. Best I could do on short notice. I'll be a lot more comfortable with that than with two powered USB 3 extension cables. --- Mike

Eric, I don’t know the answer, but will check with my staff. Clear Skies, Marj Christen Astro-Physics 11250 Forest Hills Road Machesney Park, IL 61115 Phone:

At the risk of getting verbally abused here in case I missed it in the documentation... Why doesn't APCC-PRO or the V5 hand controller show a slew speed 1800 option when connected to a 24V source?

Mike, that $999 seller has 2 available and accepts offers. Make an offer. They worst he/she can say is "no," or counter offer. It was a different seller, but they accepted $475 for mine shipped.

Wei-Hao, As we discussed through private emails, the oscillation issue that you experienced is caused by the absolute encoders desperately trying to correct for the instability caused by

I have used the USB to NUC path with zero problems for at least a year and a half now. Nothing wrong with the USB solution.

I would suggest using a static IP for the Ethernet connection at least when remote. While the CP5 supports Ethernet , it just seems to me USB (serial) is less problematic when it comes to possible

I will send you some instruction for the RA oscillation. Roland Christen Astro-Physics Inc.

For clarity, I use wired Ethernet over WiFi anywhere that I can. For my setup, I have a “normal” home WiFi router with 4 Ethernet ports. I use Ethernet wire to connect the mount to the

I’ve seen this problem where Remote Desktop can’t find the windows 10 machine. I think it may be a windows bug (but could also be related to my home WAN router.) When I’m “in the field”