|
Re: Autoguider correction frequency
Alan,
No problem here - I'm using IE7 @ 1280 x 800 and 96 dpi. The links display correctly.
You may have to change screen settings, if there is overlap. Some websites have this kind of problem - e.g.
Alan,
No problem here - I'm using IE7 @ 1280 x 800 and 96 dpi. The links display correctly.
You may have to change screen settings, if there is overlap. Some websites have this kind of problem - e.g.
|
By
Joe Zeglinski
·
#21280
·
|
|
Re: Autoguider correction frequency
The site was fine by me running a vista and firefox set-up.
Murray
Bob Piatek <bobtek@...> wrote: Well, the WEB page being messed up is puzzling. I've tested with
The site was fine by me running a vista and firefox set-up.
Murray
Bob Piatek <bobtek@...> wrote: Well, the WEB page being messed up is puzzling. I've tested with
|
By
Woodwind
·
#21279
·
|
|
Re: Autoguider correction frequency
Well, the WEB page being messed up is puzzling. I've tested with IE, Firefox, and Safari and it looks good on my system. I presume this means it is not a browser related issue.
Maybe differences
Well, the WEB page being messed up is puzzling. I've tested with IE, Firefox, and Safari and it looks good on my system. I presume this means it is not a browser related issue.
Maybe differences
|
By
Bob
·
#21278
·
|
|
Re: Autoguider correction frequency
In a message dated 03/31/08 13:38:40 Central Daylight Time, mphammick@... writes:
Would not the the best of both worlds be a system that allows you to select both the exposure time and the
In a message dated 03/31/08 13:38:40 Central Daylight Time, mphammick@... writes:
Would not the the best of both worlds be a system that allows you to select both the exposure time and the
|
By
Kent Kirkley
·
#21275
·
|
|
Re: Autoguider correction frequency
dan kowall wrote:
Dan,
The following page ?
http://www.fishcamp.com/starfish_shootout.html
Regards
Bill
dan kowall wrote:
Dan,
The following page ?
http://www.fishcamp.com/starfish_shootout.html
Regards
Bill
|
By
William R. Mattil <wrmattil@...>
·
#21274
·
|
|
Re: Autoguider correction frequency
Dan, Alan, Bob,
FYI, I don't have any problems with the Fishcamp website, either with
Firefox (2.0.0.13) nor with IE 6.0.2900.xxxx on an IBM Thinkpad T43 Laptop
running XP 1024x768...all pretty much
Dan, Alan, Bob,
FYI, I don't have any problems with the Fishcamp website, either with
Firefox (2.0.0.13) nor with IE 6.0.2900.xxxx on an IBM Thinkpad T43 Laptop
running XP 1024x768...all pretty much
|
By
Hank Sielski
·
#21276
·
|
|
Re: Autoguider correction frequency
I've seen these problems before and it had to do with screen resolution. Try
maybe 1024x768. On my monitors at the suggested max 1680x1050, all is well.
Are you using normal font size or larger?
I've seen these problems before and it had to do with screen resolution. Try
maybe 1024x768. On my monitors at the suggested max 1680x1050, all is well.
Are you using normal font size or larger?
|
By
Steve Reilly <sreilly@...>
·
#21277
·
|
|
Re: Autoguider correction frequency
I have the same problem.
I'm using Firefox.
dan kowall
Alan Voetsch <alan_voetsch@...> wrote: Internet Explorer.
Alan
--- Bob Piatek <bobtek@...> wrote:
I have the same problem.
I'm using Firefox.
dan kowall
Alan Voetsch <alan_voetsch@...> wrote: Internet Explorer.
Alan
--- Bob Piatek <bobtek@...> wrote:
|
By
dan kowall
·
#21273
·
|
|
Re: Autoguider correction frequency
Murray,
On your first question, I think the telescope mount manufacturers are doing what they do best. I've owned several AP mounts and can't think of a lot of ways they could improve. Maybe
Murray,
On your first question, I think the telescope mount manufacturers are doing what they do best. I've owned several AP mounts and can't think of a lot of ways they could improve. Maybe
|
By
Bob
·
#21272
·
|
|
Re: Autoguider correction frequency
Internet Explorer.
Alan
--- Bob Piatek <bobtek@...> wrote:
Astrophotography: http://www.pbase.com/avoetsch12952
Internet Explorer.
Alan
--- Bob Piatek <bobtek@...> wrote:
Astrophotography: http://www.pbase.com/avoetsch12952
|
By
Alan Voetsch <alan_voetsch@...>
·
#21271
·
|
|
Re: Autoguider correction frequency
Bob,
Two questions - and thanks for your comments. I am the guilty one for setting this hare running.
Would not the the best of both worlds be a system that allows you to select both the
Bob,
Two questions - and thanks for your comments. I am the guilty one for setting this hare running.
Would not the the best of both worlds be a system that allows you to select both the
|
By
Woodwind
·
#21270
·
|
|
Re: Autoguider correction frequency
Alan,
I made the web site but did not check with every browser. There probably is a problem.
What web browser are you using. I'll check it out on my end.
Bob Piatek
Alan,
I made the web site but did not check with every browser. There probably is a problem.
What web browser are you using. I'll check it out on my end.
Bob Piatek
|
By
Bob
·
#21269
·
|
|
Re: Autoguider correction frequency
Hey Bob,
I wonder if it just my computer, but there are several areas in this link where
text is covered by other text making it nearly impoossible to read.
Alan
--- Bob Piatek <bobtek@...>
Hey Bob,
I wonder if it just my computer, but there are several areas in this link where
text is covered by other text making it nearly impoossible to read.
Alan
--- Bob Piatek <bobtek@...>
|
By
Alan Voetsch <alan_voetsch@...>
·
#21268
·
|
|
Re: Autoguider correction frequency
This is an interesting thread. Though I've gotten in late on the discussion, a few points come to mind:
1) Although a guide camera may be able to take exposures as short as 20mS, this will result
This is an interesting thread. Though I've gotten in late on the discussion, a few points come to mind:
1) Although a guide camera may be able to take exposures as short as 20mS, this will result
|
By
Bob
·
#21267
·
|
|
Re: Autoguider correction frequency
Actually, the SSAG is based on a relatively inexpensive CMOS imager,
not a CCD. I don't know if Orion used it in a previous product. I
believe the Starfish guider by Fishcamp Engineering uses the
Actually, the SSAG is based on a relatively inexpensive CMOS imager,
not a CCD. I don't know if Orion used it in a previous product. I
believe the Starfish guider by Fishcamp Engineering uses the
|
By
Kurt Mihalco <mihalco@...>
·
#21266
·
|
|
Re: Autoguider correction frequency
Hi Murray,
To answer your question, the main reason for allowing short exposures
is for non-astro imaging. The cmos imaging and associated driver
chips are general purpose and marketed for all sorts
Hi Murray,
To answer your question, the main reason for allowing short exposures
is for non-astro imaging. The cmos imaging and associated driver
chips are general purpose and marketed for all sorts
|
By
Kurt Mihalco <mihalco@...>
·
#21265
·
|
|
Re: Autoguider correction frequency
The Orion SSAG is actually a repackaged version of an older CCD camera. I have seen some stunning views of the moon taken with it - so I can only assume that it can be an effective CCD.
More than
The Orion SSAG is actually a repackaged version of an older CCD camera. I have seen some stunning views of the moon taken with it - so I can only assume that it can be an effective CCD.
More than
|
By
Woodwind
·
#21264
·
|
|
Re: Autoguider correction frequency
Can this camera work like a webcam and capture many frames per second
to do planet imaging? Just a thought.
Larry
calculation.
autoguider has the ability to sample as often as up to 20 times
Can this camera work like a webcam and capture many frames per second
to do planet imaging? Just a thought.
Larry
calculation.
autoguider has the ability to sample as often as up to 20 times
|
By
Larry Phillips
·
#21263
·
|
|
(No subject)
Hi Gerald,
I received with the printed manual a small sheet of paper with
title "Special Notice to Mach1GTO Owners".
This says that :
- The keypad is set to 1200GTO.
- The parameters for Mach1GTO,
Hi Gerald,
I received with the printed manual a small sheet of paper with
title "Special Notice to Mach1GTO Owners".
This says that :
- The keypad is set to 1200GTO.
- The parameters for Mach1GTO,
|
By
Pierre Henrotay
·
#21262
·
|
|
Re: Autoguider correction frequency
David and Roy,
I think that you have answered my question about why the fast rates are available - the are to do with mirror corrections rather than mounts. This is similar to modern tank sights
David and Roy,
I think that you have answered my question about why the fast rates are available - the are to do with mirror corrections rather than mounts. This is similar to modern tank sights
|
By
Woodwind
·
#21261
·
|