Any updates on first production run numbers and when they may start to ship? 12-18 months? A handful or perhaps 25ish? I'm hoping to fall in the top 25 on the list. :)

Boy do I have Rolando fooled!!! However, what you seek is a #10-32x1/8" stainless steel socket cone point set screw. That may be a tough order for your local hardware store. You can't

Hi all, For those who have not seen this yet, here is my first light image taken with the 305mm Honders astrograph. http://www.astro-physics.com/roland/m57-305rh.htm Seeing was not very good, but

John, Can you try an external utility (like portmon) to do the logging? -Ray

Thanks, Rolando. - Danny

Sorry - I had it flagged for reply, not forgotten, but required a longer answer than I had time for. The quick version is: I can't get logging to work on my vista32 PC.

I made the mistake of trying to adjust my RA backlash last night in the dark. I ended up loosing this screw into the darkness and I can't find

Thanks for the feedback, Lane!

I have been using a Mach1 with my AP155 for about two years for both visual and imaging. The only problem is it's sensitive to wind, otherwise, it works fine. Lane

After a short wait (another case of good timing) My new 1200 arrived today. Thanks Roland and Co.! All ready for the Honders. :)

vedeler@... writes: You know, there's always Howard at AP. He knows everything. I'm sure he could find you a screw. Rolando ************** We found the real ‘Hotel California’ and

danny@... writes: Marj says soon, maybe as soon as next week. Rolando ************** We found the real ‘Hotel California’ and the ‘Seinfeld ’ diner. What will you find?

Hey John, How about answering my question about logging the output? :-) Have you done that? Although it's possible the driver is causing this problem the act of disconnecting/reconnecting may

Hi Chris, ASCOM v5, although afaik it makes no difference, since the driver shipped with both is the same. John

A post a couple of months ago suggested notifications for the 900 might start going out at the end of April (with delivery being in summer some time). Has anyone seen or heard anything? I was in a

Mark, I asked this question on the other AP group and this is what Roland replied: I have used my 160F7.5 on that mount both for visual and imaging. Worked fine. The weight is not as important as

Thanks for your input, Richard!

it might work if there's not too much wind   Rich Neuschaefer uses an AP180EDT f/9 on an AP900 for visual. That's not enough mount in my experience for imaging in all but the calmest of wind

Visual...

Do you plan to use it for visual or imaging Mark?