James, Sorry, it was my fault. John Smith, who runs CCDWare, gave me a coupon code that I thought it was the same as the code used last time. The web page has now been corrected. (The coupon is

Ray, I am certain. I tried this multiple times. The item in the shopping cart is "PEM Pro 2.0 [#300169992]". You may want to try an experiment yourself to see if this happens to you as well. By

Hi James, Are you sure you selected to purchase the full version? You cannot use the coupon on the upgrade. -Ray

Ray, I tried to purchase the full PEMPro. The upgrade coupon that is referred to on the linked page does not work in the checkout - there is an error code that comes up saying that it is an invalid

PLEASE......where do I sign up?

206EDF refractor, 1200 mount, 8300 CCD chip, going incredibly deep. (Makes me half think I have to bring this size scope back into limited

Hi, While using my 1200 GTO last night I noticed that the keypad was making random clicking sounds every couple of minutes. The keypad didn't reset and tracking continued as normal. Just two clicks,

Incredible. As for the 206mm, I think you might sell a few of 'em :-). Steve http://www.picturethecosmos.com

Hi Chris, Actually, it is on the website. The current keypad manual has a great explanation complete with Howard's illustrations that clearly shows the east vs west concept. Refer to pages 62-65. I

An all weather motorcycle cover works well for me. Quite cheap but heavy duty. Mine has beathing vents to allow condensation to evaporate. Luke Hank/Ray, This is very similar to my

Anthony, there you go again, doing real science. (G) Keep it up as it's very interesting to see that small aperture can do this work. Jim

Hi all, Here is a real masterpiece done by Tony Hallas, A2151 LRGB taken with 206EDF refractor, 1200 mount, 8300 CCD chip, going incredibly deep. posted half size image on

Good stuff ... and thanks! Anthony.

ayiomami@... writes: There are two little Allen screws that hold the servo onto the back of the RA axis. Loosen them and the servo box comes right off the mount. We also supplied every owner

Dear group, Good weather and very good seeing are finally here and represent an opportunity to brush off a serious amount of rust accumulated during winter and spring due to inactivity thanks to

Ditto.

Hank/Ray, This is very similar to my situation. Camping tents usually come in two pieces with the outer sheet being weather-resistant. I wrap it around my AP1200 a couple of times and then use

Rolando (and Howard), I was not aware of the fact the electronics on the AP1200 were portable (similar to the Mach1GTO). Can you please elaborate on how they can be removed for safe storage when the

Hank, I just use a heavy duty tarp from a local hardware store and a large bungee cord wrapped around the body of the mount to keep the tarp held down. This has worked great for years on my mount and

Hi Rich, I have left my AP900 covered in a homemade tarpaulin cover with Telegizmo scope cover underneath for last 5 years. It has survived a tropical Storm, an average humidity of more than 80%