Yes, he said I need to start replacing someone these, the first is putting in the E1. I am also going to try another set of Y cables and a power supply that puts out 15v. The previous owner did

cluster@... writes: I assume you have spoken with Howard and he told you that it is a servo control problem - specifically the microchip inside the servo controller. I also assume that

Yes, I was going to do this but the page says there is a password so I have to call AP and give them my serial number to get it. I hope that works fixes is 1x guess slew PulseGuide CCD

Dean, I'm new to the Goto mounts, but a few days ago http://tech.groups.yahoo.com/group/ap-gto/message/18896 Did you ever verify which version you're using? Current is 4.12. The software version

After reading the help file, I was able to polar align in about 10 minutes with in 15 arc sec of the pole in both directions. What made the task easier is the heavy az adjustor because I know how

This is now serious problem. I have changed power supplies and there seems to be no issue with the gears. The software in the mount is 4.0x, is that the problem. This happens at any speed

Great Dean: I've got it, I just haven't tried using it......guess I will now. Kent Kirkley ************************************** Get a sneak peek of the all-new AOL

this is 4 x 20 minutes of halpha from the stinger cassegrain at f/7.2 roughly. It was shot using the 4.5nm CS Ha filter and FLI IMG1024S Dream Machine from my backyard in Castro Valley I shot a bit

this is just getting started but looks pretty interesting to me. There's the big bright nebula in the middle but there's lots of faint dark nebulosity all around the area. This is just west of

i added some exposure time to a previous image the background is less grainy now and there's a bit more nebulosity visible than the previous checkpoint there are a lot of stars in this

Ray, May I suggest that ccdware post a note on that page letting PEMProAP users that the upgrade does not apply to them? I almost clicked on it and bought it a few days ago (before I asked here).

Sorry - I don't follow many threads and I didn't mean to bring up something that folks are already fighting over (Peyton Place isn't on my viewing list). I just didn't know what the policy was for

Howard -- No worries. It's only for a spare. Cheers, -- Jeff. ________________________________ From: ap-gto@... [mailto:ap-gto@...] On Behalf Of Howard Sent:

Hey Jeff! Sorry for the mix-up. I talked to Alice, and the cable is being sent out today. (I went back and got it myself.) Apparently Roland must have interfered with the office staff at the

I might be interested in whether the bird was approaching me or leaving me. Or perhaps rotating. How difficult would it be to find some narrowband filters tuned a little above or below laboratory

Thkx Ray, my apologies I saw the Buy section with PemPro 2.0 but no Upgrades. The Software Upgrades section was just below the bottom of the displayed page. I almost missed it again this morning

Dear group, Fortunate to have a really good string of great weather and good seeing, I sat down last night to pursue Pickering's Triangle (aka Sim 3-188) within the Veil Complex. I pursued an LRGB

writes: I'm not in the office myself. The office staff won't let me interfere (otherwise there would be chaos for sure!) Good idea. Howard is very knowledgeable on technical aspects and Alice is

Hi Ray, I am with you surrounding the earlier discussion of RGB vs narrowband. However, I do understand and respect the need for the latter when someone is burdened with light-pollution. As a

Roland -- Um... that would be your office. But I'll give Alice or Howard a jingle. Thanks, -- Jeff. ________________________________ From: ap-gto@...