There are two sets of software, the one in the keypad and the one in the servo controller. These two are separate from each other and stand alone from each other. Version 4.12 is the keypad

I took some video the other evening of the ISS traversing my sky, but with the clutches off and trying to swing the mount by hand. I caught a few frames in which the ISS appeared - more by good luck

Hello: Recent events have caused the three group moderators (Bob Kuberek, Jim Fakatselis, and Derek Wong) to remind everyone on ap-gto that this is intended to be friendly place where people

Dean, How is TheSky configured? Are you using the ASCOM or native driver? I can see where conflicts can occur if TheSky is connected via native and Pulse Guide by ASCOM. The proper way to connect

Dean, I have the SKY6 and Pulseguide working on both serial ports, but I run both serial cables to a 4 port serial to usb converter and then to my laptop. Never have seen this problem. I have a

Hi Howard, I upgraded to the version 4.12 but before doing that moved Pulse guide on the top serial port and the Sky on the bottom. I connected Pulse Guide and then the sky. Issue still occurred.

Hi Dean and Group, I spoke with Dean about the issue this morning, and I thought that I should make a few trouble-shooting comments to the group as a whole. * We always recommend that you have

Yes, he said I need to start replacing someone these, the first is putting in the E1. I am also going to try another set of Y cables and a power supply that puts out 15v. The previous owner did

cluster@... writes: I assume you have spoken with Howard and he told you that it is a servo control problem - specifically the microchip inside the servo controller. I also assume that

Yes, I was going to do this but the page says there is a password so I have to call AP and give them my serial number to get it. I hope that works fixes is 1x guess slew PulseGuide CCD

Dean, I'm new to the Goto mounts, but a few days ago http://tech.groups.yahoo.com/group/ap-gto/message/18896 Did you ever verify which version you're using? Current is 4.12. The software version

After reading the help file, I was able to polar align in about 10 minutes with in 15 arc sec of the pole in both directions. What made the task easier is the heavy az adjustor because I know how

This is now serious problem. I have changed power supplies and there seems to be no issue with the gears. The software in the mount is 4.0x, is that the problem. This happens at any speed

Great Dean: I've got it, I just haven't tried using it......guess I will now. Kent Kirkley ************************************** Get a sneak peek of the all-new AOL

this is 4 x 20 minutes of halpha from the stinger cassegrain at f/7.2 roughly. It was shot using the 4.5nm CS Ha filter and FLI IMG1024S Dream Machine from my backyard in Castro Valley I shot a bit

this is just getting started but looks pretty interesting to me. There's the big bright nebula in the middle but there's lots of faint dark nebulosity all around the area. This is just west of

i added some exposure time to a previous image the background is less grainy now and there's a bit more nebulosity visible than the previous checkpoint there are a lot of stars in this

Ray, May I suggest that ccdware post a note on that page letting PEMProAP users that the upgrade does not apply to them? I almost clicked on it and bought it a few days ago (before I asked here).

Sorry - I don't follow many threads and I didn't mean to bring up something that folks are already fighting over (Peyton Place isn't on my viewing list). I just didn't know what the policy was for

Howard -- No worries. It's only for a spare. Cheers, -- Jeff. ________________________________ From: ap-gto@... [mailto:ap-gto@...] On Behalf Of Howard Sent: