Just a thought...How long is your settle time during the model generation? If your settle time is too short you might be getting elongated stars that don't solve. The first solve and recal you

Hi Ray, I have the same error after upgrading to 1.9.0.1. Pier flip with SGP is working but I have both East and West limits unchecked to prevent counter weight up slews. With the previous version

That is a very good first try with poor seeing. Looks like we will be getting some ISS pass movies from Astro-Physics scopes this year. Thank you for your time and SkyTrack software.

question for Ray on APCC. Any APCC performance downside or side effects with shutting down APCC by; close all other applications, park mount, and then close APCC by 1) clicking APCC window close

Hi Ray, I'm not completely certain but I did 2 tests back to back without changing anything, about an hour apart. Did not touch anything physically. Run 1: Model Dec spacing 1 degree - Ra spacing 5

Hi Brent, can you please explain in Steps, how you have done that please. Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171 1983476

Outstanding result. Who needs encoders :). Kidding, I know encoders do more than eliminate PE.

Nice!

So fun! Great capture, Brent! Karen AP

Very cool Brent. Is SkyTrack updated to use the Mach2 yet? I am going to have to get my dual band Yagi out of the closet and mount it on the Mach2 and start talking on the AMSATS again. -- Dean

I recently cleaned and lubricated my AP1100 with fixed gearboxes. After some help from George to fine tune gear meshing, last night I was ready to create a new PE correction curve. I'll let the charts

Nice job, Brent! I'm glad the new real-time RA/Dec feature helped you keep ISS centered! -Ray

Hi Luca, I'll take a look. I made some changes to the SGPro REST API interface to try to make it work with NINA, but that didn't work out, so I created a new interface class for NINA. I thought I had

Hi Rouz, I am not convinced that was the cause. A good PEC table will not affect the model. However, if the PEC table was corrupted or partially-written into the controller it might cause an offset

Hi Linwood, It's a little complicated because when TCP or UDP is selected the primary COM port is shown as the backup port. The intent was to make it easy to switch between the network and the COM

The AP V2 driver fails to start when I select auto-connect in APCC Pro 1.9.0.1. I get two error messages, as shown in the attached screenshots. After clicking the messages away, I can start the driver

As expected, the meridian flip failed at 2:20am because SGP requested a slew to flip the mount just past the crossing of the meridian and APCC left the mount CW up because it was still inside the West

APCC v1.9 has a great new feature which offers "real time" (non-cached) modelled mount coordinates. This allows for closed loop satellite tracking (comparing the mount's current position to the

Adding the screenshot again as an attachment. Luca

Hi Ray, I have installed APCC Pro 1.9.0.1 and the command Send Limit with offsets to SGPro appears not to work any longer. If I change the Flip Offset, the meridian flip time in SGPro does not change