Thanks. I have an even more minor complaint and am in need of advice. Very often, the Emergency Stop window persists after slewing is complete, and when it would normally disappear. It just

I've seen a lot of charts like that one that are misleading due to either (1) wrong y axis scale chosen or (2) wrong focal length entered for the guide scope. The critical number is the RMS which in

Hi Arvind, There is, in fact, simple modeling provisions in the V5 Keypad and CP5 combo, presently being shipped with the Mach 2. We are working to make this available for the CP4/keypad combo.

To conclude this thread, there was never an issue in the first place. I don't know why both of my computers failed to upload 4.19.5 version into my Keypad the first day and suddenly the next day, it

I'd like to offer a new-customer perspective on this. I came from a MyT and The Sky X and so had some concerns about a software based system as opposed to hardware/firmware, and what limitations this

Let me confirm what you are saying? 1) at park = true ,and when Parked at Park positions 1-5. must unpark, start tracking before slewing can occur? 2) at park= true can occur if pointing at a star

Hi, A-P team: I am asking this for a future purchase, and hopefully for the benefit of others who might have a similar question. So far I have been under the impression that to be able to build a

I distribute software that I have written and this is a constant struggle with false positive virus detections. I always run a Virus Total check and report any false positives to the Anti-Virus

I am glad for you. Do you have a screenshot using +/- 1" instead of 8" ? At 8" it's hard to tell how well things really are. Eric

Tom He did not...that's why A-P IS special!! Bryan I think Roland went out of his way to make sure my mount was super special.

Hi all, Similar behavior with Kasperky…. Regards, Ashen

I seem to recall that I had to disable my anti-virus software (Webroot) the first time I downloaded APCC. After that first time it was no longer necessary. Mike

David This may be similar to Norton's WSReputation.1 flag. It means that the security software does not have enough usage info in its database on the tested software. That's not a surprise for ANY

Using a regular pointing model. 100 points for half the sky. Tom

Mark Lamb wrote: No automated rotator, but I have a dovetail type (w/ 3 screws) rotating adapter from my Vixen FL55ss drawtube to M48. I manually set the camera angle using levels or the

Hi David, > Minor complaint about error windows in APCC. I often can’t access the error window. It appears to be hidden > by the main APCC window. The Error Log Window is set to be a

I’ve gotten the same error recently. It happened when building my APPM model, not while acquiring data. It didn’t seem to have any effect on the process. Minor complaint about error windows in

Most impressive. I can't read the details on your screen shot. Are you using some king of pointing model ? Mike

335594 2021-11-03 01:59:07.145: ASCOM: Info : GET AtPark = True 335595 2021-11-03 01:59:07.180: ASCOM: Info : GET SideOfPier = East 335596 2021-11-03 01:59:07.296:

Dave, There's a bunch of lines missing from your attachment, but according to line 330505 the response from the GOS command indicates the mount is parked. 330420 2021-11-02 23:41:49.586: