Done deal. I will keep an eye on that thread and chime in more if he tries to mislead people further. HasAnyoneSeenMyNebula uses this group as well. Please do not listen to Ken, he has no idea what he

Hi all, It would be appreciated if someone has time to post a response to the incorrect information on Cloudy Nights about APCC's Virtual Ports and APPM at this

The best options to configure a NUC that I found are: https://simplynuc.com/nuc-products/ (scroll down, you see some pre-configured NUC's but you can "build" them too) NewEgg has a whole slew of

I have been using a "standard" NUC for about 6 years now, both in my roll off roof OBS and while traveling to dark sites. Three years ago before going on a 6 week trip I bought a second NUC so that I

I have an 8th generation i5. It has quite a few USB 3 ports. It also has a thunderbolt port which I think they all do now. I use this with a Thunderbolt to 10GBe network adapter which is 10x faster

Hi Steve We have pretty much that exact model, except the i7 and 16gb ram Personally I wish we would have gotten the 512gb for the main drive. The log files fill things up really fast, and we have to

Steve wrote: Thanks for the feedback Linwood. Yes this unit does have a cable that hooks up to the MB for a single RS232 port and the others will have to be via USB to Serial and for that I

Running an Intel NUC for 2 years without any problems. NUC: I3, 8 Ram, 256 ssd, rated for 19V but, according to the manual, you could use 12V and that is what I am using. Win 10 Pro. It is at my

The best!

Just a fyi- Astro-Physics have contacted me directly and we are troubleshooting. Great support as usual.

Thanks for the feedback Linwood. Yes this unit does have a cable that hooks up to the MB for a single RS232 port and the others will have to be via USB to Serial and for that I already have this

Patrick, Let me know when you are ready to pull the trigger. I am interested! Best, Michael Sent from Smallbiz Yahoo Mail for iPhone

Steve Reilly wrote: Shared Product:Industrial Fanless Intel Whiskey Lake NUC With Dual LAN I know you said you needed serial ports, but do you need an industrial strength solution? A very nice

One feature you may want to look for is Windows 11 compatibility. Windows 10 will be supported to 2025 according to Microsoft and Windows 11 has security requirements at board and BIOS level. Thus,

Awesome, thanks Chris!

The manual is in the Wiki section. Clear Skies, Marj Christen Astro-Physics 11250 Forest Hills Road Machesney Park, IL 61115 Phone: 815-282-1513 www.astro-physics.com

I started this thread back in July and here it is September and I’ve finally built the deck and have the dome almost finished. I need to install the motors and controls but I’m back on the NUC

Hello Stacey, I have verified that you recently received your Mach2GTO. Congratulations! Since you own a Mach2 and have a keypad, I will send an invitation to join the Keypad-V5 group which is

Just run a guide graph in PHD2 with guide corrections turned off. Run it for 15 or 20 minutes so you can see the tracking rate over several worm cycles. Then you will know what you are dealing with.

On the APCC FAQ Page: I just sold my mount and the new owner would like to use APCC. May I transfer the license? Yes, you and the buyer must both contact Astro-Physics to make arrangements. You will