|
Re: Off Topic-NUC Computer
Hi Steve
We have pretty much that exact model, except the i7 and 16gb ram
Personally I wish we would have gotten the 512gb for the main drive. The log files fill things up really fast, and we have to
Hi Steve
We have pretty much that exact model, except the i7 and 16gb ram
Personally I wish we would have gotten the 512gb for the main drive. The log files fill things up really fast, and we have to
|
By
Brian Valente
·
#81485
·
|
|
Re: Off Topic-NUC Computer
Steve wrote:
Thanks for the feedback Linwood. Yes this unit does have a cable that hooks up to the MB for a single RS232 port and the others will have to be via USB to Serial and for that I
Steve wrote:
Thanks for the feedback Linwood. Yes this unit does have a cable that hooks up to the MB for a single RS232 port and the others will have to be via USB to Serial and for that I
|
By
ap@CaptivePhotons.com
·
#81484
·
|
|
Re: Off Topic-NUC Computer
Running an Intel NUC for 2 years without any problems.
NUC: I3, 8 Ram, 256 ssd, rated for 19V but, according to the manual, you could use 12V and that is what I am using. Win 10 Pro.
It is at my
Running an Intel NUC for 2 years without any problems.
NUC: I3, 8 Ram, 256 ssd, rated for 19V but, according to the manual, you could use 12V and that is what I am using. Win 10 Pro.
It is at my
|
By
Renan
·
#81483
·
|
|
Re: Mach2 RA Judder
The best!
By
Bill Long
·
#81482
·
|
|
Re: Mach2 RA Judder
Just a fyi- Astro-Physics have contacted me directly and we are troubleshooting. Great support as usual.
Just a fyi- Astro-Physics have contacted me directly and we are troubleshooting. Great support as usual.
|
By
Brent Boshart
·
#81481
·
|
|
Re: Off Topic-NUC Computer
Thanks for the feedback Linwood. Yes this unit does have a cable that hooks up to the MB for a single RS232 port and the others will have to be via USB to Serial and for that I already have this
Thanks for the feedback Linwood. Yes this unit does have a cable that hooks up to the MB for a single RS232 port and the others will have to be via USB to Serial and for that I already have this
|
By
Steve Reilly
·
#81480
·
|
|
Re: Transfer of APCC Pro license with sale of a mount?
Patrick,
Let me know when you are ready to pull the trigger. I am interested!
Best,
Michael
Sent from Smallbiz Yahoo Mail for iPhone
Patrick,
Let me know when you are ready to pull the trigger. I am interested!
Best,
Michael
Sent from Smallbiz Yahoo Mail for iPhone
|
By
Michael Kelly
·
#81479
·
|
|
Re: Off Topic-NUC Computer
Steve Reilly wrote:
Shared Product:Industrial Fanless Intel Whiskey Lake NUC With Dual LAN
I know you said you needed serial ports, but do you need an industrial strength solution? A very nice
Steve Reilly wrote:
Shared Product:Industrial Fanless Intel Whiskey Lake NUC With Dual LAN
I know you said you needed serial ports, but do you need an industrial strength solution? A very nice
|
By
ap@CaptivePhotons.com
·
#81478
·
|
|
Re: Off Topic-NUC Computer
One feature you may want to look for is Windows 11 compatibility.
Windows 10 will be supported to 2025 according to Microsoft and Windows 11 has security requirements at board and BIOS level. Thus,
One feature you may want to look for is Windows 11 compatibility.
Windows 10 will be supported to 2025 according to Microsoft and Windows 11 has security requirements at board and BIOS level. Thus,
|
By
Richard Schiek
·
#81477
·
|
|
Re: Transfer of APCC Pro license with sale of a mount?
Awesome, thanks Chris!
By
Patrick Spencer
·
#81476
·
|
|
Re: Keypad Recalibrate with CP5/Mach2
The manual is in the Wiki section.
Clear Skies,
Marj Christen
Astro-Physics
11250 Forest Hills Road
Machesney Park, IL 61115
Phone: 815-282-1513
www.astro-physics.com
The manual is in the Wiki section.
Clear Skies,
Marj Christen
Astro-Physics
11250 Forest Hills Road
Machesney Park, IL 61115
Phone: 815-282-1513
www.astro-physics.com
|
By
Marj Christen
·
#81475
·
|
|
Re: Off Topic-NUC Computer
I started this thread back in July and here it is September and I’ve finally built the deck and have the dome almost finished. I need to install the motors and controls but I’m back on the NUC
I started this thread back in July and here it is September and I’ve finally built the deck and have the dome almost finished. I need to install the motors and controls but I’m back on the NUC
|
By
Steve Reilly
·
#81474
·
|
|
Re: Keypad Recalibrate with CP5/Mach2
Hello Stacey,
I have verified that you recently received your Mach2GTO. Congratulations! Since you own a Mach2 and have a keypad, I will send an invitation to join the Keypad-V5 group which is
Hello Stacey,
I have verified that you recently received your Mach2GTO. Congratulations! Since you own a Mach2 and have a keypad, I will send an invitation to join the Keypad-V5 group which is
|
By
Marj Christen
·
#81473
·
|
|
Re: Unguided dumbbell stars insights
Just run a guide graph in PHD2 with guide corrections turned off. Run it for 15 or 20 minutes so you can see the tracking rate over several worm cycles. Then you will know what you are dealing with.
Just run a guide graph in PHD2 with guide corrections turned off. Run it for 15 or 20 minutes so you can see the tracking rate over several worm cycles. Then you will know what you are dealing with.
|
By
Roland Christen
·
#81472
·
|
|
Re: Transfer of APCC Pro license with sale of a mount?
On the APCC FAQ Page:
I just sold my mount and the new owner would like to use APCC. May I transfer the license?
Yes, you and the buyer must both contact Astro-Physics to make arrangements. You will
On the APCC FAQ Page:
I just sold my mount and the new owner would like to use APCC. May I transfer the license?
Yes, you and the buyer must both contact Astro-Physics to make arrangements. You will
|
By
Chris White
·
#81471
·
|
|
Re: Keypad Recalibrate with CP5/Mach2
Keypad-V5@ap-gto.groups.io
Grüsse
Konstantin v. Poschinger
Hammerichstr. 5
22605 Hamburg
040/8805747
0171/1983476
Keypad-V5@ap-gto.groups.io
Grüsse
Konstantin v. Poschinger
Hammerichstr. 5
22605 Hamburg
040/8805747
0171/1983476
|
By
Konstantin von Poschinger
·
#81470
·
|
|
Transfer of APCC Pro license with sale of a mount?
There was a thread recently that suggested AP was looking into changing the licensing terms to allow transfer of an APCC Pro license with the sale of a mount. Was that change ever implemented? I'm
There was a thread recently that suggested AP was looking into changing the licensing terms to allow transfer of an APCC Pro license with the sale of a mount. Was that change ever implemented? I'm
|
By
Patrick Spencer
·
#81469
·
|
|
Re: semi-OT: deterring critters in the obsy
Can’t get Lyme disease from a mosquito bite
Get Outlook for iOS
Can’t get Lyme disease from a mosquito bite
Get Outlook for iOS
|
By
thefamily90 Phillips
·
#81468
·
|
|
Re: semi-OT: deterring critters in the obsy
Robert,
One minor quibble: I've never heard of a case of Lyme disease from a mosquito bite. The usual mode of transmission is from the bite of a tick infected with the Borrelia bacterium.
dan
Robert,
One minor quibble: I've never heard of a case of Lyme disease from a mosquito bite. The usual mode of transmission is from the bite of a tick infected with the Borrelia bacterium.
dan
|
By
dan kowall
·
#81467
·
|
|
Re: Keypad Recalibrate with CP5/Mach2
Sorry to seem like an idiot but I've searched ap-ug and ap-gto for "keypad5, keypad, keypad 5," including the files. I even did a general search of IO groups and I can't find it.
Sorry to seem like an idiot but I've searched ap-ug and ap-gto for "keypad5, keypad, keypad 5," including the files. I even did a general search of IO groups and I can't find it.
|
By
Stacey Mills
·
#81466
·
|