Yes it's called Lucky Imager

Hi Christopher Can you provide the logs that show the calibration prior to this session? After your "middle of the session" calibration, Dec does not appear to be responding to guide pulses I don't

Greetings. I've been a lurker on this forum for quite a long time but this is my first post. I've owned a Mach 1 GTOCP4 for a few years and recently bought a lightly used 900 GTOCP3 for permanent

When I run a small model using the NASA cam, everything completes fine, but I do not get a prompt to install the model in APCC. Does that happen only when running it for real with plate solves or am I

Yes, the AP ASCOM driver allows you to specify where to park the mount. One of the options in the "Park To" field is a specific azimuth/elevation. I use the driver's direction buttons to move my

On Sun, Jan 15, 2023 at 12:07 PM, Emilio J. Robau, P.E. wrote: I have noticed a couple of things in regards to the subject item and NINA in general. It seems that NINA won't park in the user defined

Is there some sort of imaging referree that can declair this sort of excellence a foul due to the location and experience of the imager?

I have noticed a couple of things in regards to the subject item and NINA in general. It seems that NINA won't park in the user defined alt-az which is what I use to park the mount at the end of a

I've had a TOA130 with a guidescope (90 mm) on a Mach1 for that matter, with a similar imaging train as mentioned above. I would think Mach2 wouldn't even notice it. Go for it.

Thank you Brian. Just noticed that myself. Updating now.

On my Mach1GTO I have a TOA130-NFB with Optec Focuslynx, ZWO 7x2" EFW, OAG-L, and ASI6200MM. It works very well. I use the FLAT-67 or 0.7x reducer depending on target and mood. The 645 flattener

I would say it is most likely OTA cone error, possibly combined with some OTA component flexure or flop. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

My concern is how different east and west values are. It looks either my mount is really off or possibly a cone error. Unfortunately I had not been able to run that model with the target it was

Hi Michael Was there something specific you had a question about regarding this mapping run? Brian -- Brian Brian Valente astro portfolio

This looks fantastic Brian. Colors look great. Framing great. Awesome image. Love the detailed little galaxies sprinkled everywhere too.

By the way Brian, love your Witch Head image. Cheers Mike

Here's the capture from last night.

Guys My final Part 2 review of the TEC 5 Eyepiece Turret. https://www.youtube.com/watch?v=uqUydg172x4 tony

Thanks Stuart and Karen! I'm going to have to stop looking at this one because since the last update I decided I didn't like that left-to-right red gradient and decided to do something about it...

I also agree with the use of Victron gear and I use their chargers. I also don’t see the need for a battery box for a LiFePO4 battery and just made some carry straps for the battery (takes up less