Ray, given the problems I am having with APCC, I don't suppose that I can use my APPM model anyway. Larry

Ray, I will await a message from you when they get back to you. Larry

Hi Philip, Version 1.9.3.1 has an updated Horizons application and documentation: https://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.9.3.1a.exe Here is a link to the help section online

That can happen if the mount is not responding because it is disconnected or powered down with apcc and the driver still querying the mount. The recommended shutdown procedure is: 1) Disconnect all

Hi Emilio, There’s not enough information to determine the problem. You should try updating to the latest driver version, v5.40.01. If that doesn’t help, it could be that the settings

Usually, you can install over the old version. The installer will tell you if you need to uninstall the existing APCC installation first from the Windows Control Panel. -Ray

Hi Larry, It's unclear what's causing the issue. It may be a combination of hardware and a Windows update, for instance. I don't know. The issue has occurred in only a few computers, so it is not

Hi Philip JPL data went through a change recently, and you may need to update your APCC to the latest https://ap-gto.groups.io/g/main/message/83930 you may also search the forums for discussion on

Hi all and happy new year... Just a quickie hopefully. I have the Pro version of APCC and recently went to use the Horizons feature in order to slew over to observe the JWST. The link within APCC

Last night at the end of the APCC Pro session (1.9.0.11) I was surprised with this error. The strange thing is that the mount, a Mach2, worked fine all night and the session frames look perfectly

The end of the connector pin of an Anderson Power Pole connector has to hook over the spring. Under normal circumstances it will and it will stay there no matter how abusive you are. Then you have

Lickity-split that grease kit is already here. I bought my AP1600 used. In the Greasing mounts instructions the last topic is : 1600GTO, 1100GTO, and Mach1GTO with Auto-Adjust Motor Boxes. How do I

The keypad automatically sends Lunar rate when the Moon is chosen, solar rate when the sun is chosen and sidereal rate when any other object is chosen. You can also choose manually the King rate when

Shawn, I use SkySafari-6 Pro Android and it does NOT automatically change tracking rate depending on the object selected or after a GOTO to the Moon or Sun with my Celestron mounts. I

I generally use the Keypad/GTOCP5 goto capability or SkySafari/iPhone to find celestial targets. Questions: 1. If I use the Keypad/GTOCP5 and select the moon, will the Mach 2 automatically adjust to

Hello Ray, I wanted to note that for about the last three months or so I have been receiving the following error upon triggering the ASCOM driver within APCC. Run Time Error 91 Object variable or

@Karen Oh, my license is July 2020. @Ray Okay, thanks Ray. I will try it, as I use SGP. Can I install this version in parallel to 1.9.0.11, i.e. have both installed, or do I need to delete

Thanks Rolando Carbon based error strikes again. Just to clarify. Going from NH to SH won't change the PE, but failing to click "Southern Hemisphere" and using Pempro will give an erroneous result

I would be open to that. As a reminder, I mentioned in a discussion before Christmas that I have reverted back to an older version of APCC and the problem persists. This version was not a problem

There will indeed be a difference. Different part of the gearwheel teeth are used for N versus S. Rolando