This is a new installation, AP1600GTO w/absolute encoders. After a few nights operation I began exploring more of APCC's features and noticed something a bit odd: Before Initialization, Park 2

Yes that is what I meant. Thanks George From: ap-gto@... on behalf of George george@... [ap-gto] Sent: Thursday, March 2, 2017 7:33:54 AM To: ap-gto@... Subject: [ap-gto] RE: Polar Axis Cover

Bill, If you are talking about the sight hole cover on the Dec axis it is: 1100GTO threaded hole: 1.460”-20 (threads per inch) Regards, George George Whitney Astro-Physics,

Don there is discontinuity in power inside the shield . Bending it cuts off power Suresh

The one who tops the list in speed of service is Daleen !!

I can confidently say after trying to update over 50 times , the only time it updates is when you hear the beep noise at the beginning . Any laptop is fine and my assumption that a USB 2 socket works

Gentlemen , I replaced the coiled cable and it works like new !! I was lucky to diagnose it ( accidentally I touched where it enters the hc and found the weak link ) . While

Actually, my message wasn't clear. Sky X isn't doing anything with a com driver - just the asccom driver. But I figured out it was user error - the virtual port wasn't connected automatically so

Why would skyx be configured with a com port when if you intended on using the ascom driver? It sounds like you might be trying to use theskyx native driver instead of the ascom driver. -Ray

Does the polar axis on the AP1100 use the same threads and size as the cap on the AP900? If not, does anyone know the measurements? I dont have anything to measure the thread pitch with.

Derek, constructive criticism here not not picking. Chris, I do see how a first lock position cam is a safer way to know 'you're in the groove,' flip the cam to mid point then slide the scope into

Hi guys: Stephen Pizzo told me that the adapter was a relatively minor expense compared to the rest of the saddle. I think that the circular adapter arose from its use on Takahashi mounts. The

It does look like an intriguing product but I don't see how it willhelp me get a C14 or an M16 on and off of my 1100 with any more ease and safetythan a regular dovetail bracket. And I agree about

Looks great but what I don't like to all, is the miniscule adapter plate needed between the 1100 head and the Rayox. When I bolted an DOVELM2 to my Mach 1 or the DOVELM162, to my 1100 there is a

Tried the new version of the software and it works perfectly. I can now initialize the mount with a TZ of 13 hours. Thanks heaps Ray. Craig

Thanks Ray, I really appreciate you working on this so quickly. I'll give it a try today and report back. Great software and great service.

Amazing result, Marc ! Peter

Hello: I have a very nice dovetail saddle that I reviewed on Cloudy Nights. It is pricey but very solid and I am going to use it with my 1100GTO and various scopes including a 152mm Super Planetary.

Michael, This is the place to check for updates (I just posted the message a couple hours ago). It was a very minor change to the allowable time zone range. -Ray Gralak Author of APCC (Astro-Physics

I started my imaging run tonight and happened to glance at it to check the automation was going OK and noticed the APCC banner (title bar) indicated that 1.5.0.20 is available. Is there a standard