And the link is https://xa.yimg.com/df/ap-gto/screen-cutoff.JPG?token=DbzMcPZek85FnDpLDoxPFJGehNTJzSXiG_zFoig-259Ru6SbCnyt_ivvNcJYhLDw61zenv1WWkoVuG2oFIGBBoJeIP9503bpPHIT-C5OqP8&type=download

The file link is https://xa.yimg.com/df/ap-gto/screen-cutoff.JPG?token=ZeYGggAFn9jzKxvUQ5AEtLwR605KYG_NQOcuWy7Mv8Qr4NeFIX2x-vrCjKkCuXm-tZhmpHCsfTmqqbhdEK--ShKQ_KbR2UDLWif6VZ0GyX0&type=download

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ap-gto group. File : /screen-cutoff.JPG Uploaded by : sreilly22911

And the main window is cut off. My recommended resolution is1920x1080 and is set accordingly and have the latest NVIDIA driver as well. Anysuggestions. I need to do some troubleshooting with my mount

Thanks. That is encouraging. Rick

Yes, the old 900/1200 mounts used a different design on the clutches and can become sticky. We also used a heavier grease back then which included a sticky component. You might want to re-grease your

And the main window is cut off. My recommended resolution is 1920x1080 and is set accordingly and have the latest NVIDIA driver as well. Any suggestions. I need to do some troubleshooting with my

I used my year 2007 AP1200 at -10F last night after a break of practically a year. I am accustomed to a bit of high pitched squeal during the first few slews on a cold night. (p.s. I run at 15V).

If you get an 1100GTO I would not worry about the low temperatures. Just tell AP where you plan to use the mount so they can give you the best lubricants for the system. There are Astro-Physics

As you probably know, we've had some very cold clear nights the last couple of days. We are located just south of the Wisconsin border, so we get similar cold temps. Right now my observatory

https://www.google.com/search?q=astro-physics+mounts+in+antarctica&prmd=isvn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiW5Ibwt63YAhVJRCYK A-P mounts in antarctica. Peter

Spent the day. Finally got it working again. Solution? I'm not sure- however, I did remove the CP4 from it's normal connection to the mount (for my setup) and jostled it around - wiggled connections,

I'm considering the purchase of the Astro-Physics 1100GTO. I live in Wisconsin and I'm concerned about its cold weather capability when imaging? I've been known to image in 0 degree temperatures,

yeah yeah.....

Quote: One caveat using the Lodestar: bin it 2x2, otherwise you will be dealing with the dreaded "Venetian blind" effect which makes it difficult for the guiding software to find the centroid of the

psssssst. yahoo groups are archaic. EXTREMELY hard to follow a thread, include their clutter (logo and email app add in every post). They make it difficult to include a image. I hate google and

Out-of-focus stars will cause worse guide errors which I explained in a previous post. Rolando

And the main window is cut off. My recommended resolution is 1920x1080 and is set accordingly and have the latest NVIDIA driver as well. Any suggestions. I need to do some troubleshooting with my

That worked for me too.