Chris, please let us know when the book is available. I'll bet that even those of us relegated to "portable" will find a lot of useful info applicable to our situation as well.

Chris Would love to have a copy! Let me know when/ where to order one. Don

Great idea for a book. Looking forward to it. Keith

Put me down for a copy Christopher!!! Stuart -- Stuart Heggie http://www.stuartheggie.com/featured.html

Can't wait to see that! Rolando

Boy, there is so much to say and so much information toprovide! A person could write a book about everything someone shouldknow about designing, building, maintaining and automating reliable

I wanted to run the FIT through PixInsight's FWHMEccentricity script, which a lot of people here use to grade images. I was then going to post the results, so people that use PI to check image quality

Not the full size image, no. Too large to send via e-mail. What are you looking for in the image? Rolando

If not, can you upload it here? You should have write access. https://1drv.ms/f/s!AtqRof7LftCbg6Qw86ymZ4ivTiFXug

Cant post that on the Yahoo file share?

It's too large to send. Rolando

Hello All, My testing of Mach1 mounts and guider settings continues. I have posted two new results in the Files section. Guiding results are again seeing limited, with Monday night seeing about 50%

Can you share the actual FIT file too?

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ap-gto group. File : /Mach1 Guiding/M57-Ha-Mach1-130GTX.jpg Uploaded by

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ap-gto group. File : /Mach1 Guiding/2018-07-23_2314GuidePerformance2.jpg

Somehow my previous post never showed up on this site, until a few minutes ago. Not sure why it took 12 hours to post. Sorry for the double post. I guess it doesn't hurt to be too complimentary of

Thank you, Gary! -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3:

I have an Ethernet cable to my new 1100, CP4, and continuously get the same Comm errors. I talked to AP about a month ago, and sent the logs they asked for, but never heard back.... A friend has a

Thanks very much, Ray, for your advice and for your products! You are always so helpful.

Thanks very much, Ray, You are always so helpful. I had a sense, when I re-installed the gear, that it was seated a bit differently than when I removed it from how the gears moved when I turned them