Hi Joe, I think you can easily see that there are missing points from the graph because there would be long lines between points where data is missing. That said, I created a new version of PEMPro

Howard, Ray, thank you.. Understood, but all drivers are properly installed according to the recommandations : I paid attention to install the good Ascom AP V2 driver as you could see with the screen

Howard/Remy, If an older ASCOM driver is in use then this could also be an issue with the configuration of "." and "," if the meaning of these is reversed compared to here in the U.S. -Ray

Lee, Sure, please zip the logs or provide a drop box link to them. For the driver and APCC logs please use APCC's log zipper utility as it will include all of the necessary files if you "check" the

Howard, just this precision: I confirm I had updated before your repairing intervention; I got the last version of APCC : version 1.6.0.3 for APCC Pro. The version 1.6.0.4 seems specific for APCC

i have looked at the logs but can't understand what they are telling me. i mentioned in my original post if you are willing, i can provide you with logs from focusmax, apcc, and ascom that have

There's not enough information to determine what happened. Have you tried looking at your ASCOM driver logs at the timestamps where the slews failed? That might provide a clue. For instance, perhaps

FYI, park 3 was not a problem for the return slew from the focus run. park 4 demonstrated the same issue as park 1. does not like a return slew close to 90deg. what is bothersome is this was not a

Call me at AP. Do you have TeamViewer by any chance?

Thank you Howard. Only, I will be able to test these procedures sooner this week-end. I will report to you after. Still thank you again. RC

First off, if I remember correctly from our remote session, you are not in the latest versions of either APCC or the driver. I would update to the latest as a first step Second. I have seen similar

Hello! I have used the 1600 and APCC for some years in combination with the SkyX without a glitch. I just broke the system down and installed in a new semi-permanent location with new

Hello, why is there a DEC difference between AP V2 Ascom screen and APCC screen? The coordinates read on APCC screen are right although false on AP V2 Ascom screen . each movement in RA are right

I don't have anywhere to post the sub. The lower lobe picked up a lot of brown, the top arm has a seam running along its length, more colour was added, a very slight brown. Lots of activity in the

Very beautiful image. Wondered how much the Ha data added in your opinion. Would it be possible to post the Ha sub? Joe Morris

Park 1 is sort of anomaly, it is so close to going under the mount that it may not be handled by some software. Sky X for instance can give you an error. Try slewing to Park 3 first before attempting

Hi Ray, A thought just occurred to me about a SECOND “earlywarning system”, in cases where the mount suddenly goes berserk and heads forthe pier at “break-scope” speed. This has now

Thanks Rolando. She's only a 10 inch, and a fairly rare scope. There were only a little over 10 of these built. I would love to have a bit more image scale and aperture to reach out a bit further.

hi ray -- i am having an odd problem with focusmax. i know you didn't write focusmax but it relates to a slew command error that is happening ONLY the FIRST time i do a focus run. when my session

Or are they passing each other in the night? Thanks for the comment.