A year ago a buddy in my dark sky site operation bought a Pole Master and matching adapter for his AP900GTO mount. He was impressed with its ability to improve his polar alignment and he asked me if

Hi Ray, Thank you very much for helping me with this... Eduardo. Em qui, 16 de ago de 2018 às 10:39, 'Ray Gralak (Groups)' groups3@... [ap-gto] <ap-gto@...> escreveu:

Hi Joe, The next release of APCC, which has been completed and is in internal testing at A-P, can use any ASCOM ObservingConditions driver. That said, APCC has always had the ability to calculate

Ray, .... “APCC can also monitor temperature, humidity, and barometric pressureto calculate a better estimate of refraction“ Which version of APCC PRO added this feature, and whichT & H

Hi Eduardo, Accuracy is improved only in the area where the recal/sync was performed. APCC Standard does not include a pointing model, so an RCAL/SYNC only would only potentially improve pointing

Agreed. And I must also add that polar alignment is a delight with the smooth and precise knobs. My old EQ6 was clunky and the two axes seemed to interfere with each other a bit too. This is buttery

It doesn’t look like a political statement to me. It simply looks like a statement of fact. I don’t infer anything about your political preferences from anything below. For my part, I have

Thanks George. I should have thought of that at the get go.

Thanks much for the link and tips. I realize nothing is as good as doing it and I will get my hands dirty and have fun with it ;)). I'll download the program and start playing with it.

I agree with you Darrell, it is a brilliant system. Makes precise balancing a piece of cake! Just remember to hold on to your counterweight shaft when disengaging the worm in case you are way out of

Hi everyone, I am sorry if this is answered somewhere else, but I could not find using Yahoo search engine. I am using APCC (standard version) and AP V2 Ascom driver with my Mach1 GTO CP4 mount. I

Check the Tech Support page of our website. http://www.astro-physics.com/tech_support/mounts/Making_PE_Curve.pdf Regards, George George Whitney Astro-Physics, Inc. Phone:

Hi Dale, No, I don't think any verification is needed. I am sure I found it. If you like to hear the technical details on how I found this using the SQLite database and logs I could email you

You could start here by scanning the help contents for subjects within that interest you. https://siriusimaging.com/Help/PEMProV2new/hmcontent.html But nothing will substitute for actually using it.

Hi All Tonight, I achieved another milestone with the Mach 1. I used the Lever Assembly and disengaged the Worm Wheel for fine balancing. It has taken a while for me to work up the courage for

I have an AP Mach 1 which is only several months old and I primarily do unguided, short exposures, aka EAA. It works just fine but I wanting to just learn more about PE and PEC in case I ever need to

If you’re a Canadian…your screwed…as always!! J

Almost every time. Eric

By the way, this is not a political position I'm taking as far as tariffs etc., something obviously has to be done about trade imbalance. It turns out that raw materials are being hit, but finished

Hello All Astronuts, I just want to remind you all that the new production has started and we are well under way to deliver these mounts later this Fall. If you wan to reserve one, please contact the