All worked fine last night. I will keep monitoring this. I wonder regarding the weather problem I had, if I have to record a new pointing model before implementing the weather correction? I would

Cool. Rolando

Hi Roland I finally got a chance to try your suggestion to resume from Park 3. It works great !

Hi Joel, Since you are probably not using APCC (and thus no pointing model) Lat/Long can be approximates. The mount and software would only use Lat/Long for Alt/Az calculations and calculating local

Thanks Ray. Regarding the site coordinates, do you know how close the site coordinates need to be to the "real" coordinates for practical use? Can I be off on the coordinates by XXX miles and still

Hi Joel, The latest version of the driver, currently 5.20.07, should be able to save an arbitrary number of sites. Not that I am aware of, but APCC can read input from most GPS devices. -Ray

Hi, The log entries are a little ambiguous to me because the second line says that tracking has been stopped, but was it stopped by ACP, or had it been already stopped? That said, the error message

Funny thing about that -- within an hour of posting I had a taker for my old 900 RA/Dec assemblies. I think they'll be going to a good use. :) Thanks for the interest Wade, and

So I am running my system last night testing collimation on my Tak 180 ED and it is running fine for the first couple objects then I get this, I believe, non-fatal error in the scheduler log. There

Thanks. That explains all. Please see my other post about another APC/APCC issue that came up last night..

I have two questions related to a CP4 and the ASCOM driver. I do not use a handpad or APCC. 1. What is the maximum number of sites that can be saved in the ASCOM driver? 2. Is there a way to

Congratulations on the 1100! If you are offering your old mount for the price of shipping (and nobody has already taken it), I would be happy to take it off your hands. I already have a couple of

Hi all, new member, first post. :) I just replaced a 20-year-old AP900 with an AP1100GTO for my AP180EDT. Everything went swimmingly. My big question: Do the somewhat beat-up

Temperature, pressure, and humidity values are used only for a refraction calculation in APCC Pro. That is, they are plugged into an equation to calculate refraction, which can change as temperature,

Yes Ray, I cross-posed over there. Just on general principles of reversing what I had done recently it was fixed. I did include multiple ASCOM drivers to get the weather. I am still unsure about

Have you tried posting the issue to the ACP forum for Bob to look at? I don't see any information in the log section that you provided indicating that the ObservingConditions ASCOM driver is the

Weather cleared here and started capturing images but APC crashed twice. Disabled the new weather environmental variable in APCC 17.0.1 and it ran. Log does not mention APCC. ACP console log opened

Beautiful capture Glenn! Stuart -- Stuart Heggie http://www.stuartheggie.com/featured.html

I've enjoyed my Mach 1 for a few years now and other than Transit of Mercury, I've really only used it for visual. You used it your 1st night! Impressive. John A. Sillasen

Thanks, all! Glenn