|
Re: King Rate not active on ASCOM driver
On Fri, Jan 27, 2023 at 09:12 AM, David wrote:
posts by Ray GralakHere they are. I wonder how long this version of the driver will remain compatible with APCC?
On Fri, Jan 27, 2023 at 09:12 AM, David wrote:
posts by Ray GralakHere they are. I wonder how long this version of the driver will remain compatible with APCC?
|
By
David
·
#92239
·
|
|
Re: King Rate not active on ASCOM driver
Hi Ajay, looking at the ASCOM driver version history its seems that V5.40.00 "- Add King rate for CP4/5 versions VCP4-P02.08 and VCP5-P02.08 and later.". So despite King Rate being supported by the
Hi Ajay, looking at the ASCOM driver version history its seems that V5.40.00 "- Add King rate for CP4/5 versions VCP4-P02.08 and VCP5-P02.08 and later.". So despite King Rate being supported by the
|
By
David
·
#92238
·
|
|
Re: PHD 2 synchronous pulse guide warning pop up
All latest versions of NINA, APCC,
All latest versions of NINA, APCC,
|
By
Peter Gottstein
·
#92237
·
|
|
Re: PHD 2 synchronous pulse guide warning pop up
There's a thread about this from a while back; I'm not sure if there's anything more recent. tl;dr Asynchronous is preferable, but the warning can still appear. Apparently it's a PHD2 problem that
There's a thread about this from a while back; I'm not sure if there's anything more recent. tl;dr Asynchronous is preferable, but the warning can still appear. Apparently it's a PHD2 problem that
|
By
Marc Blank
·
#92236
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
By the way another clear night here in New Mexico, we will see if I can do better tonight ;-).
--
Kirby Collins
astrobin: https://www.astrobin.com/users/kirbycollins80
By the way another clear night here in New Mexico, we will see if I can do better tonight ;-).
--
Kirby Collins
astrobin: https://www.astrobin.com/users/kirbycollins80
|
By
Kirby Collins
·
#92235
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
I actually took three different sets of subs that night (I wasn't quite sure how this was going to work)...first 30x60 seconds with normal sidereal tracking, then started comet tracking with Horizons,
I actually took three different sets of subs that night (I wasn't quite sure how this was going to work)...first 30x60 seconds with normal sidereal tracking, then started comet tracking with Horizons,
|
By
Kirby Collins
·
#92234
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
I think you can still process it even if you captured the filters sequentially, give it a shot with the new process!--
Brian
Brian Valente
astro portfolio
I think you can still process it even if you captured the filters sequentially, give it a shot with the new process!--
Brian
Brian Valente
astro portfolio
|
By
Brian Valente
·
#92233
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
Brian,
I really appreciate the link and correcting me on my process. I messed up and did not cycle between the filters. I will try to capture it again tomorrow.
Brian,
I really appreciate the link and correcting me on my process. I messed up and did not cycle between the filters. I will try to capture it again tomorrow.
|
By
Kanwar
·
#92232
·
|
|
Re: Alt/Az Version of Mach2GTO
For visual, I like to hunt down small galaxies and other small, faint objects with my C14, which has a small field of view. A mount that points precisely makes that much easier. The AP hand controller
For visual, I like to hunt down small galaxies and other small, faint objects with my C14, which has a small field of view. A mount that points precisely makes that much easier. The AP hand controller
|
By
weems@...
·
#92231
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
Kanwar
PS - I may be repeating myself but PixInsight released a complete rewrite of the comet alignment process which will work much better for mono+filters
It has great documentation to go with
Kanwar
PS - I may be repeating myself but PixInsight released a complete rewrite of the comet alignment process which will work much better for mono+filters
It has great documentation to go with
|
By
Brian Valente
·
#92230
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
Kirby,
You are correct. I meant LRGB subs using my mono setup and then generate final color image. I have similar concerns as you mentioned. My hope is CometAlignment in Pixinsight would do its magic
Kirby,
You are correct. I meant LRGB subs using my mono setup and then generate final color image. I have similar concerns as you mentioned. My hope is CometAlignment in Pixinsight would do its magic
|
By
Kanwar
·
#92229
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
HI Kanwar
for a mono camera, it is pretty much the same approach, but most mono imagers rotate the filters: expose red, switch and 1 exposure green, switch and 1 exposure blue, repeat
Building the
HI Kanwar
for a mono camera, it is pretty much the same approach, but most mono imagers rotate the filters: expose red, switch and 1 exposure green, switch and 1 exposure blue, repeat
Building the
|
By
Brian Valente
·
#92228
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
Do you mean take RGB subs and combine with your mono camera and combine them for a color image? I’ve always used an OSC for things that move fast like comets so I didn’t have to deal with the
Do you mean take RGB subs and combine with your mono camera and combine them for a color image? I’ve always used an OSC for things that move fast like comets so I didn’t have to deal with the
|
By
Kirby Collins
·
#92227
·
|
|
Re: C/2022 E3 ZTF this morning (1/22/2023)
Hello,
I am trying to capture comet using mono camera. I followed the steps Kirby mentioned and able to track the comet and take images to verify. All good but not sure how to proceed with mono setup
Hello,
I am trying to capture comet using mono camera. I followed the steps Kirby mentioned and able to track the comet and take images to verify. All good but not sure how to proceed with mono setup
|
By
Kanwar
·
#92226
·
|
|
Re: Calling All Mach 2 owners
>>>I filled out the survey. Happy to do so.
thank you so much!
>>>I found the Mach2 very easy to set up. I had a far more difficult time a few years ago...
sent you pm on this
--
Brian
Brian
>>>I filled out the survey. Happy to do so.
thank you so much!
>>>I found the Mach2 very easy to set up. I had a far more difficult time a few years ago...
sent you pm on this
--
Brian
Brian
|
By
Brian Valente
·
#92225
·
|
|
Re: Calling All Mach 2 owners
I filled out the survey. Happy to do so.
One thought as I did... My responses reflect the fact that the Mach2 was NOT my first AP mount. I found the Mach2 very easy to set up. I had a far more
I filled out the survey. Happy to do so.
One thought as I did... My responses reflect the fact that the Mach2 was NOT my first AP mount. I found the Mach2 very easy to set up. I had a far more
|
By
mjb87
·
#92224
·
|
|
PHD 2 synchronous pulse guide warning pop up
Quick question should the synchronous pulse guide box in ASCOM driver be checked or not checked to minimize the chance of this warning coming up? As this has been happening almost every session.
Best
Quick question should the synchronous pulse guide box in ASCOM driver be checked or not checked to minimize the chance of this warning coming up? As this has been happening almost every session.
Best
|
By
Peter Gottstein
·
#92223
·
|
|
Re: King Rate not active on ASCOM driver
The documentation for driver version 5.40.01 in this document [https://www.gralak.com/apdriver/APV2_ASCOM_Driver_5.40.xx.pdf] says under Tracking Rate Controls: "Clicking this button sets Sidereal
The documentation for driver version 5.40.01 in this document [https://www.gralak.com/apdriver/APV2_ASCOM_Driver_5.40.xx.pdf] says under Tracking Rate Controls: "Clicking this button sets Sidereal
|
By
Ajay Narayanan
·
#92222
·
Edited
|
|
Re: Mach1GTO Motor Stall While Guiding/Imaging
Figure out what the problem was.
A club member took the gear box cover off today to do some further inspecting and he figured out that the bolt through the center spur gear had worked itself loose,
Figure out what the problem was.
A club member took the gear box cover off today to do some further inspecting and he figured out that the bolt through the center spur gear had worked itself loose,
|
By
Dustin Smith
·
#92221
·
|
|
Re: 1600GTO - guiding near zenith not so good, perfect elsewhere - reasons?
Mike
Thank you. I think you may well be right. What is strange about this issue is that it seems to affect both RA and DEC. Also, another confounding factor is that this same tandem setup - with one
Mike
Thank you. I think you may well be right. What is strange about this issue is that it seems to affect both RA and DEC. Also, another confounding factor is that this same tandem setup - with one
|
By
R Botero
·
#92220
·
|