Hi everyone, First time poster. Just recently got my AP 1100 GTO a few weeks ago and I've been integrating it into my imaging workflow. I use Voyager Advanced to automate my imaging sessions with a

It all makes sense now. I was shopping for accessories to go with my new Mach2, and I found exactly what I was looking for: an Astro-Physics tuque! (APCAPW) -Dwight

The image is actually very helpful. I am going to do the same. The 1100 unit will not be taken apart. The weights and the weight rod will be in cases.

On Fri, Oct 21, 2022 at 11:00 AM, Emilio J. Robau, P.E. wrote: I plan on NOT TAKING APART the 1100 for now, because it is a pain to take everything apart. I've shared this before, and people laugh,

I think it was the foam factory that stated an electric carving knife would work.

On Fri, Oct 21, 2022 at 01:03 AM, Nathan Myhrvold wrote: So, no hard foam. No thin foam either. The Kaizen foam discussed below would be fine for padding counterweights but I suspect that it would

Thanks Fernando I will be getting my 1100 GTO sometime in the next week or so. Saw it on the internet and since the update was so old, I figured there had to be something else being used. Thanks

In case anyone is interested, here is the case I

Wow guys, This is all good information. Richard, What you have is about what I am going for except my cases are larger and have a capacity of 65 pounds so I am going to set them up for two deep and

Across the river from me!

Nope. Instead try APCC Pro with AP V2 drivers. Fernando

I either use a 1 inch or 2 inch piece of memory foam that I lay in the bottom of my box to cushion my tubes when I am transporting them despite what foam is in the waterproof case. In the car, I use a

On Fri, Oct 21, 2022 at 01:03 AM, Nathan Myhrvold wrote: These curves are for a 10 inch cube object weighing 60 lbs, with a fragility limit of 50G, being dropped 24 inches. That might not be a

A while back I decided to look up the engineering calculations for packaging to see what types of foam are best and so forth. I have a lot of equipment and a lot of cases, so why not understand what

indeed. I was surprise that something like this would be so close to Deneb. -- benoit

Darn. -- Dean Jacobsen Astrobin Image Gallery - https://www.astrobin.com/users/deanjacobsen/

-----Original Message----- From: chris1011@... To: main@ap-ug.groups.io <main@ap-ug.groups.io>; main@ap-gto.groups.io <main@ap-gto.groups.io> Sent: Thu, Oct 20, 2022 9:32 pm Subject: False Alarm (Re:

False alarm I just processed another 6 subs with Deneb moved to a somewhat different location on the chip. The bubble is not in the same location in the image, and it looks like it's a reflection

...a year in Tuscany... Marj, did you take note? Regards, Yves

My Uncle and cousins grew up in Montreal, and they speak perfect both languages. I was not so lucky, only had French instruction in school. We learned it as a matter of normal education, but did not