Little Moose ok, BIG Moose, no! Rolando

Excellent videos Karen. You make the ones I do look 3rd rate :) Is it possible to do a video showing (with a mount) how to do a complete daytime alignment of the mount? It would be much

Roland Would a "little MOOSE" be okay to use (as shown below) to tighten those screws :) tony On 4/21/2022 11:54 AM, Roland Christen via groups.io wrote:

Everything has worked fine for me so far. I did the upgrade from from 10 to 11 using the Software Update in Windows.

Hi Jerry, APCC does not control the IP address settings of your mount. The best way is to log back into your router and make sure it is assigning a *static* IP address to the mount. -Ray

The CP4 has wired and wireless Internet ports and each has its own unique MAC address and each will get it's own DHCP IP assignment. I hope that helps. "Always take the high road. There's less

Hi, Am using APCC latest version and for the life of me cannot get the system to accept a fixed DHCP lease for its TCP connection. I set it on my router with the right MAC address but almost at

I bought a mini pc which came preinstalled with Win 11. I had no intention of trying it prior to that, but absolutely everything astro related works with no issues whatsoever. I can see no advantage

Loosen the clutches, send it to Park3, let it go where it wants. Then move it manually to Park3. That's it. Rolando

Andy, Thanks. I have a permanent setup, so I will go right to APPM to build the model Jack Jack Huerkamp Jack's Astro Accessories, LLC 38388 Pine Street Pearl River, LA

Linwood, Thanks. The video I found was made by Dale Ghent. That is why I was interested in using NINA to do the APPM . Yours truly, Jack Jack Huerkamp Jack's Astro Accessories,

nothing bad... I have done it a 100 times. -- benoit <mmccawsprojects@...> wrote:

Darn, I forgot to park my AP900 last night. Started at pointing to zenith to do flats . So what actually happens to the clutches when it goes a few hours pushing scope against pier for a few hours?

For those of us who do not have a permanent observatory (or in my case a semipermanent) the ability to have NINA automate the Dec arc model is fabulous.

Thank you, Karen, Todd

The NINA plugin is meant to simplify setting the parameters to build an APPM model. It is really handy for building an Arc Dec model based on the target programmed in the sequence. The Arc Dec model

I’ve been using NINA for a few months now. I also use APCC and APPM although I don’t use NINA to build my model. I start APCC before NINA and haven’t used any of the NINA add-ons to couple NINA

I will echo Brian, no issues here running Win11. (NINA, SharpCap, APCC, ASCOM, etc.) Todd

Thank you Brian.

On Fri, Apr 22, 2022 at 04:46 PM, Jack Huerkamp wrote: I found a YouTube video on using NINA with APPM. The video is relatively old and talks about the use of “NINA 1.11”, the “Utilities for