|
Re: NINA not Parking my 1100
Are you running SGPro and NINA under different permissions realms? What I mean by this is, are you perhaps running one as Administrator and the other not?
Are you running SGPro and NINA under different permissions realms? What I mean by this is, are you perhaps running one as Administrator and the other not?
|
By
Dale Ghent
·
#84094
·
|
|
Re: NINA not Parking my 1100
When I have the V2 ASCOM driver running along with APCC, my MACH2 parks to what is specified in the ASCOM driver, so you may want to check there too.
When I have the V2 ASCOM driver running along with APCC, my MACH2 parks to what is specified in the ASCOM driver, so you may want to check there too.
|
By
KHursh
·
#84093
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
John,
Doesn't it seem as if the issue lies with Stellarium, not PHD2? I have no evidence for this statement but I suspect that Stellarium is the problem. The internal telescope control is a
John,
Doesn't it seem as if the issue lies with Stellarium, not PHD2? I have no evidence for this statement but I suspect that Stellarium is the problem. The internal telescope control is a
|
By
Joel Short
·
#84092
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
JUST AN UPDATE for any following this thread.
Disappointingly – but not unsuspected… the guys over at the PHD2 group looked at my guiding and debug logs – and blamed the problem, as they
JUST AN UPDATE for any following this thread.
Disappointingly – but not unsuspected… the guys over at the PHD2 group looked at my guiding and debug logs – and blamed the problem, as they
|
By
John Davis
·
#84091
·
|
|
Re: NINA not Parking my 1100
Yes APCC was configured to park to Park 1. When I checked the mount in the morning and saw it not in Park 1, I checked APCC, which indicated in the Telescope Postion section that it was parked. I
Yes APCC was configured to park to Park 1. When I checked the mount in the morning and saw it not in Park 1, I checked APCC, which indicated in the Telescope Postion section that it was parked. I
|
By
Alex
·
#84090
·
|
|
Re: NINA not Parking my 1100
Have you checked to make sure that APCC is indeed set to park at your desired park position instead of "Current Position", which is in fact a valid park location?
Yes, there are no notions of park
Have you checked to make sure that APCC is indeed set to park at your desired park position instead of "Current Position", which is in fact a valid park location?
Yes, there are no notions of park
|
By
Dale Ghent
·
#84089
·
|
|
NINA not Parking my 1100
I’ve been using SGP to automate my rig for a while now, but I thought I’d give NINA a try. Things mostly seemed to work, but one issue is that the scope wasn’t parked in its usual position at
I’ve been using SGP to automate my rig for a while now, but I thought I’d give NINA a try. Things mostly seemed to work, but one issue is that the scope wasn’t parked in its usual position at
|
By
Alex
·
#84088
·
|
|
Re: Piertech3 Adjustable Pier with AP1600 Experience
Psparkman
I have a Piertech adjustable single column carrying an 1100 GT with a 2500mm scope in a 7x10 Piertech rolloff. I park at P4 to clear the roof when closed. Good images using a 320 pt APPM
Psparkman
I have a Piertech adjustable single column carrying an 1100 GT with a 2500mm scope in a 7x10 Piertech rolloff. I park at P4 to clear the roof when closed. Good images using a 320 pt APPM
|
By
Worsel
·
#84087
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
I don't have this particular issue but the AP-V2/Stellarium ASCOM addition has some issues. I'm using the first Stellarium version that included the code (and thanks to the guy who did it!). It
I don't have this particular issue but the AP-V2/Stellarium ASCOM addition has some issues. I'm using the first Stellarium version that included the code (and thanks to the guy who did it!). It
|
By
Steven Panish
·
#84086
·
|
|
Re: Anyone using 13035FF Field Flattener with TEC140FL?
Thanks, Roland, for your check of optical compatibility of the 13035FF with the TEC160FL.
Since it’s not a good optical fit, It appears that I will, in fact, need to remove the OAG from my
Thanks, Roland, for your check of optical compatibility of the 13035FF with the TEC160FL.
Since it’s not a good optical fit, It appears that I will, in fact, need to remove the OAG from my
|
By
Greg Vaughn
·
#84085
·
|
|
Re: Piertech3 Adjustable Pier with AP1600 Experience
Psparkman,
Regarding moisture coming up from the bottom of an observatory.
Almost all the observatories I’m familiar with are built on concrete slabs – except for mine which is a mobile
Psparkman,
Regarding moisture coming up from the bottom of an observatory.
Almost all the observatories I’m familiar with are built on concrete slabs – except for mine which is a mobile
|
By
Woody Schlom
·
#84084
·
|
|
Re: Piertech3 Adjustable Pier with AP1600 Experience
Psparkman,
You say you live in San Diego. Are you a member of SDAA (San Diego Astronomy Association)? I ask because I believe there are several of us who have Piertech piers. Mine is the
Psparkman,
You say you live in San Diego. Are you a member of SDAA (San Diego Astronomy Association)? I ask because I believe there are several of us who have Piertech piers. Mine is the
|
By
Woody Schlom
·
#84083
·
|
|
Piertech3 Adjustable Pier with AP1600 Experience
Greetings everyone. I am the recent lucky owner of an AP1600AE and I want to use it with my Celestron C14 for imaging. I want to build a "Micro" observatory in my small suburban San Diego back yard.
Greetings everyone. I am the recent lucky owner of an AP1600AE and I want to use it with my Celestron C14 for imaging. I want to build a "Micro" observatory in my small suburban San Diego back yard.
|
By
Patrick Sparkman
·
#84082
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
I think that possibility has been eliminated by the tests which all involve the same guide camera operating with the same settings. There are no problems in the system until Stellarium is added to the
I think that possibility has been eliminated by the tests which all involve the same guide camera operating with the same settings. There are no problems in the system until Stellarium is added to the
|
By
John Davis
·
#84081
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
I think the problem is that there are so many variables :( One possibility is the guide camera not downloading the image and so PHD freezes. I use SBIG St-i and SC-2 for guiding and have not seen this
I think the problem is that there are so many variables :( One possibility is the guide camera not downloading the image and so PHD freezes. I use SBIG St-i and SC-2 for guiding and have not seen this
|
By
Cheng-Yang Tan
·
#84080
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
There are many things in NINA that stop guiding, depending on your options setting. Most stop it and restart it (e.g. an autofocus run might do that). If you can reproduce that, it may be worth
There are many things in NINA that stop guiding, depending on your options setting. Most stop it and restart it (e.g. an autofocus run might do that). If you can reproduce that, it may be worth
|
By
ap@CaptivePhotons.com
·
#84079
·
|
|
Re: APCC new install error
Larry,
No word from Eltima, unfortunately. We may have to find an alternative solution if they don't come through soon.
-Ray
Larry,
No word from Eltima, unfortunately. We may have to find an alternative solution if they don't come through soon.
-Ray
|
By
Ray Gralak
·
#84078
·
|
|
Re: Problem with PHD2 when also connected to Mach1 mount using Stellarium's Telescope Control plugin
John, I thought I noticed similar several weeks back but wrote it off to something I was possibly doing. The difference for me is that I was not running Stellarium, that I recall. I was running NINA
John, I thought I noticed similar several weeks back but wrote it off to something I was possibly doing. The difference for me is that I was not running Stellarium, that I recall. I was running NINA
|
By
midmoastro
·
#84077
·
|
|
Re: Power Supply/USB 3 Hub Recommendations? UPDATE
I posted this image a few days ago of the PPBAdv Gen 1 and notice the gaffer tape. It covers port 1 (which is fairly useless, something fixed in Gen 2) and also the variable output. That variable
I posted this image a few days ago of the PPBAdv Gen 1 and notice the gaffer tape. It covers port 1 (which is fairly useless, something fixed in Gen 2) and also the variable output. That variable
|
By
ap@CaptivePhotons.com
·
#84076
·
|
|
Re: APCC new install error
Todd, somehow I missed your post on Jan 5 and did not see it until nx6a replied today about his experience. Thanks for the feedback and I will ponder this as it does look like a minefield. Thanks to
Todd, somehow I missed your post on Jan 5 and did not see it until nx6a replied today about his experience. Thanks for the feedback and I will ponder this as it does look like a minefield. Thanks to
|
By
Larry Phillips
·
#84075
·
|