Hi Todd and all !!! Where did you get version VCP4-P02-10 ? Thanks ! Happy New Year !!! Regards, Yves

A replacement cost insurance policy for your astronomical equipment makes sense, and most insurance companies will gladly let you inflate the value of the articles being insured because it lets them

Peter, Thanks for asking this question. I was going to ask the same thing. The TEC field flattener seems to have insufficient back focus for me to insert an off axis guider with the TEC160. It

That works too. Roland

Mike, that worked! Thank you so much. I now have it connected to WiFi and its picking up the static IP I assigned it in pfsense, and, I can connect via HTTP to that IP. Woohoo! Todd

I have gotten insurance for all my astronomy equipment with a specialized policy here: (Why does this not allow hot links?) finestring@totaldollar .com

Todd, At the bottom of the "Advanced WiFi Settings" tab, click the radio button "Create the Access Point..." to choose a different default behavior. This can always be changed to "Retry..." later,

I also just tried moving the CP4 within 12 feet of the WiFi unit and same issue. So, I dont think it has anything to do with distance. All other WiFi devices on our network dont have any issues with

I also removed the CP4 cover and the WiFi wire is connected at both ends and it was not pinched or bent in any odd way. There does not appear to be an issue there.

Mike, Happy New Year and thank you for the additional tips. Advanced Wifi show a valid MAC address and version number (A4.0.4) Under, "In Station Mode, if auto-connection to an existing local WiFi

Hi Todd, Happy New Year! Using the embedded web pages, Click on the "Advanced WiFi Settings" tab. Scroll down near the bottom and take a look at the "WiFi MAC Address" and "WiFi Firmware Version"

If you think 130355FF would work with TEC 160FL, I would appreciate if you could calculate the back focus for this setup as well. Also would it fill a full frame camera like ASI6200MM or QHY600M?

Very cool, can you send me a picture of the shim? I need to move mine out a tad to make it blue.

I did some adjusting of the LED Cover on the Dec. Sliding it around would not make it turn green. However, I noticed that when I pulled up on it, it would turn green. So I took some thin brass shim

I cant seem to get WiFi enabled on my CP4. I connect via ethernet and web browser. I can see and change the ethernet IP from 169.254.x.x to an IP on my local network, so that part works. However, the

Happy New Year, Charlie, Moose, Tony, and All! Karen AP

Have a safe and Happy New Year guys. Charlie and little MOOSE are going to celebrate responsibly bringing in 2022 tonight :) I did a video showing the new Astro-Physics 1600GTO

When I built my observatory in the mountains of NM surrounded by a nation forest, the insurance company wanted me to separately list the items that cost more than $5000 each. Everything else was

It never hurts to uninstall APCC first from Windows control panel. You will not lose your settings or registration. -Ray

Hi George, can you please send it olso to me. Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476