Alex, I use a user defined park position as I need to be slightly CW up from the park 5 position. So, try a custom alt/az if one of the pre defined positions are not working for your situation.

Hi Alex, Park 1 is not recommended, so the warning message purposely cannot be disabled. However, no warning message will display if you define a custom Alt/Az Park position. -Ray

Due to my sloping roofline in my observatory and that my 1100 is a bit taller than my old mount, the only safe place to park my mount is in park position 1. My problem is that the ASCOM driver is

Roland/Mike, With normal connection: E/W moves RA, N/S does not move DEC. Swap connection at mount: N/S moves RA, E/W does not move DEC. Swapping RA and DEC cable does not affect anything. So the

Todd, I am having exactly the same issue that you had with the error message. I have a new Win 10 computer that is only 2 weeks old. I want to understand what you had to do to upgrade to Win 11

I have my Mach2 mount setup in my backyard under a TG365 cover and on one occasion when one axis wasn’t behaving properly, I found that I just needed to ensure that the barrel connectors that secure

So how much do you want to bet, that switching the RA/DEC cables shows them to "work" and then reconnecting them back the right way "fixes" the problem? 😁😊😉

You didn't strip any gears. You probably have a bad cable. Mark the Dec cable and put it on the RA side. See if the problem moves to the RA side. If so, we can ship you a new set of cables on

Hi Yanzhe, There are several things that could cause your symptoms. Please run the following test to help isolate the problem: 1) Swap the RA and DEC cable connectors *AT THE MOUNT*. The yellow LED

My mach2 suddenly developed an issue tonight during imaging. I first noticed that something went wrong because SGPro said the meridian flip failed (I have been imaging for a few months and never had

Hello Peter, I’m so sorry – it appears we didn’t include the instructions in your kit. I’ll send them directly to you via private message. For reference in case this comes up

I received my compass upgrade kit for my Mach 2. The kit came with steel post, plastic gasket and gasket maker glue? Does anybody have directions on how to install this? Once installed how do you

Thanks to all the replies - I appreciate it and I'm sure I'll have more questions soon.

Hello Ray, Did you ever look into fetching GPS data from a Primalucelab Eagle4? Thanks, Terry

-----Original Message----- From: chris1011@... To: main@ap-gto.groups.io <main@ap-gto.groups.io> Sent: Fri, Dec 17, 2021 10:51 am Subject: Re: [ap-gto] AP-1100 Guiding Questions "After releasing the

Ray, I even went back and installed 1.9.0.11 with the same error messages. I am out of my depth now and do not know what to do next. Sounds like a Win 10 problem. Larry

"After releasing the pressure on the motor box, the play disappears but not instantly." Yes, that's exactly how it should work. The spring system has a built-in dampening mechanism. "when releasing

Ray, it looks like I have bigger issues than thought. I installed 1.9.3.1 and get the same error messages. Larry

Ray, refresh my memory. Do I need to uninstall the version already on the computer or can I install over it? Larry

Please realize this is not a problem that we have control over. It's an issue on *some* computers between Eltima and later versions of Windows 10. So, it probably won't help the Eltima issue, but the