Wow, no idea what happened... I've had my Ap1100 for about 2 months now. I was imaging tonight and everything was great. I did about 3 hours, tracking was 0.31 arcsec RMS. All of a sudden the

Hello Bob, I run three scopes on an AP 1600. A 12" Truss GSO RC as the main scope and two slaves. One of the slave scopes is a Tak E130D. Soon one of them will be a stowaway. Not sure which is

Sorry, yes Im running Windows 10 Pro.

Only using Windows Defender. No other AV solution. Panther Canyon 11PAHi7 Bob, I hope you are wrong ;-)

Hi Scott - I’m on a very similar path to what you describe below. I’ve provided some answers below. Thanks, Bob Robert J. Enouen Cell 513-504-4410 What is the status? What kind of observatory

I got this image last time I was out at my observatory Paducah, TX. I got the same reflection that was on my last shot of M78. I moved my filter placement because of the last time so not sure how to

I went through this too last year when I first got my Mach2. AP assured me this was normal. It has worked perfectly fine for me.

You’re right - that’s exactly what happened to me and I tried all the solutions you’ve been describing. I finally solved it by getting a different NUC as described in the topic you attached.

Ray would likely have deeper knowledge of what might (not) be happening here. The only remaining thing I can think of is that anti-virus is pulling shenanigans. Are you running anything other than the

checking the error log first, I do see the following: GetCurrentUtcOffset, Current Time Zone offset for '(UTC-06:00) Central Time (US & Canada)' is -6 0000020 2021-12-14 21:22:49.173: Info,

reboot in between makes no difference. After the install, though, there are several settings files left over. Im thinking about deleting everything under the Astro-Physics folder and trying it again.

Uninstalled. Right-clicked and ran as admin but still the same issue. Is a reboot needed between the uninstall and reinstall? Very odd.

The kind of error you're getting makes me wonder. Uninstall APCC, then try installing again (the beta) but this time, right click the installer .exe file and "Run as administrator"

Same error. I wonder if I need to remove other files/remnants after the uninstall of APCC 1.9.0.11?

I have not, thank you Dale. I will try this and report back Todd

Try the current beta installer instead? There are a bunch of improvements in this area. https://www.apastrosoftware.com/apcc_download/APCC_Pro_BETA_Setup_1.9.2.5.exe

Not sure if this is a problem or not, but couldn't find mention of it anywhere so I thought I'd ask. When I insert the RAPAS into the mounting bracket on my Mach2, it doesn't slide all the way in.

Beginning to wonder if this might be similar to my

Thank you Brian. I installed: APCC Pro v1.9.0.11 I looked to see if Eltima showed in Add/Remove programs but couldnt find it there. I also went to my current working laptop to see if it was installed

I never did get the CFF flattener because it wasn't available when I received the CFF92, and I wanted to try to find a reducer+flattener system that had the same (or very close to the same) BFL so