I did tried one more time today using the BETA version you provided above (Pro 1.9.1.1). I did set the proper settings and used the buttons to download the data within JPL site and the "Load JPL

Yes - thanks Ray and Geert. I was out last night at 3:30-5:30 AM tracking down comet Leonard, but didn't try to use Horizons at that time. Later this weekend I'll give it a go. -Mikey

I thought I would report my experience regarding imaging with the Mach2 unguided using my AP 140 (focal length 1046mm). I previously had an 80 point model and only got good images at 5 min. I

Yes, I do see why! I had thought from the pictures on the AP website that the 1600 mounted with longitudinal bolts through a flat base and into the pier top plate. But actually it mounts with radial

Hi Geert, Okay, thanks for confirming the Horizon update in the beta works! -Ray

Hi Ray, I have used that beta a few times now. Indeed, I load the downloaded ephemeris file with the new downoad button, it works well without copying and pasting. Thanks, Geert

I posted a beta version with a fix for Horizons about a month ago, but I haven't received any feedback for that version. In the new version, you should use the download button on the NASA Horizons

This is what that odd flip looked like: Seems to be ok after the restart and whatever I did.

Might have been a bug somewhere? Once it flipped but only the Dec motor flipped the RA didn't move and the OTA was pointing at the floor! But seems to work now restarted the PC AP V2 driver

It would depend on the rings. Thickness, machining, hinge and clamp design, materials, etc. My 6”f9 has the original AP two-piece hexagonal rings, which are very rigid. I have Parallax rings on

Thanks Linwood, That used to work a few weeks ago, I'm not sure if it was an update or something I did. I issue I suspect is that Nina says meridian in say 1 minute, but APCCs number is 16 minutes.

Dale, I wasn't sure this is to do with NINA or APCC settings. Ill try with everything set to default with pier side on, thanks. I'll continue on Discord then?

Rouz wrote: I have, no responses yet. Not sure if its a Nina setting or something in APCC. It's almost certainly the combination. I didn't notice your posting there (and may not be the one to

You asked there 10 minutes before posting here, Rouz. I might be at my computer a lot, but I do sometimes step away for a few minutes :D Yes, you need to have Use Telescope Side of Pier turned on

I am having the same problem. I get the same error message "Apparent Alt/Elevation not found in ephemeris data". The data IS

I have, no responses yet. Not sure if its a Nina setting or something in APCC.

You should probably ask them on Discord.

Hi All, Anyone know why the auto flip stopped working? I remember it used to work fine in the past but it doesn't now no matter what combination I use. Is there a key setting that needs to be ticked

Hey that seemed to work. Fog rolled in and killed my night but the ASCOM camera connection did work. Thanks!

Any word on the upcoming update to APCC to correct this? I am setting up to capture C/2021 A1 (Leonard) and it is a fast moving comet.