Roland - Earlier (about a month ago) I replied with some output from mount commands you asked for. I’m guessing that thread may have been lost in the noise or spam. In any event here’s the

Hi Tom, I am traveling right and cannot post screenshots but I have no problem with automated meridian flips with APCC 1.9 and SGP V4.680 on both an AP1100 and Mach2 with APCC sending limit to SGP

On Mon, Nov 8, 2021 at 08:46 AM, Ray Gralak wrote: Hi Tom, I tried the latest Beta and I still had the same race condition issues, but there's a good chance I just didn't configure things.

Were you able to use APCC for the info? Roland

Thank you Roland for your response to my post.

Got this and if SGP didn’t spaz out at 1:48am like apparently it did to all users, could have had another 4hrs of data! Sent from Smallbiz Yahoo Mail for iPhone

Hi Yes it was and is checked. The log is huge....100mb. Not even sure which one it is. However, the night it happened, I did manually move the mount with the clutches lose to park 3. Today I did a

The Mach 1 powerhouse. Nice work!

Thank you! All your doing fine sir!!! FYI, I ordered two more weights! Sent from Smallbiz Yahoo Mail for iPhone

That is amazing ;^)) Rolando

Hello all, I recently purchase a second hand Mach1 from a member here who assured me was in perfect condition….well let me tell you, that was an understatement! I’ve been waiting patiently for

It definitely needs to be tight, BUT first call George here at AP so he can advise you on how to adjust it. Roland

I will send you some instructions to eliminate the oscillations. By the way, has nothing to do with PHS2 or any other outside programs attached to the mount. Roland Christen Astro-Physics Inc.

Your setting of .01 seconds of time = 0.15 arc seconds at 1x sidereal. That's pretty small unless your star scintillation is close to zero. Rolando

I have attached a image taken of the Veil nebula taken while the mount was jiggling in the RA axis. The length of exposure was 75 seconds and, the focal length of the telescope is 674 mm. therefore

david w pearson wrote: Does any one have any experience plate solving with a SCT? In my case a 12" Meade. If i plate solve east of the meridian, then pointing east of the meridian is good, but

Does any one have any experience plate solving with a SCT? In my case a 12" Meade. If i plate solve east of the meridian, then pointing east of the meridian is good, but not west of the meridian. If

Terri you can't make it come to the front in the way you are doing (believe me, i have tried) you have to hover your mouse over that window preview and click the "X" to dismiss it Then you can go back

Guys, thanks for the response on the error window. I click on the task bar and see a second window, but when I click on that second window it does not come to the front. At least for me, it seems

The hidden error window has happened to me numerous times, and I mentioned it in a previous thread. I use the same workaround, but it’s annoying.