I've noticed a bit of "looseness" in the Dec axis on my Mach2. The RA axis has no loose movement at all. I assume there's an adjustment for this, I just haven't been able to find a reference.

Hello all, Here are new BETA versions of APCC Standard and Pro. Note that I said BETA! I've tested them to the best that I can, but please only download/try these if you want to try a specific

This is most definitely NOT Windows 10's fault. More likely a bios/FW caused by HP. Check for a bios update or contact their support.

My setup is semi-permanent, e.g. mount is setup on my back patio. I do not move my Losmandy FHD tripod and generally keep my mount attached. If it looks like bad winter weather is coming, I will

Dear Mark, First of all, congratulations on your new mount ! I am not the biggest Windows expert, but as far as I know you can still keep the wifi functional while having the Ethernet cable plugged

spot on - in fact it's a known "feature" for hp laptops, fix described here (bios

I use Ethernet cable connected from CP4 directly to my laptop and use WiFi to transfer captured raw images from laptop to desktop computer without issues. It sounds like it's your laptop that is

A few days ago, I received my AP1100, my 1st A-P product, to replace my ES/Losmandy G11 w/ PMC-8 as my main imaging mount. I have had connection issues using USB, with 2 of 5 nights Windows not

After a good phone conversation with George (very generous customer service) and with more inspection, I found the MA on the FHD tripod was rotated 60deg. At the base there are 6 screws, at 60deg

>>>I may be wrong but I believe you should be using single star instead of multi star when running GA. GA automatically disables guide output so no need to set MinMo to 20.0. FYI Guiding Assistant

I may be wrong but I believe you should be using single star instead of multi star when running GA. GA automatically disables guide output so no need to set MinMo to 20.0. Peter

Hi Ray, I got it from PrimaLuceLab in Italy - so it shouldn't be a Swiss version of Windows if I am not wrong. Regards, Aygen

Aygen Thanks! The computer is running a long-term service version of Windows 10 Enterprise, originally introduced about three years ago. I have not tested with any version of Windows 10 Enterprise,

Thanks for the instructions since I am not a WINDOW guy :).

Aygen, Can you tell me the exact version of Windows that is running on the computer? You can find out by clicking the Windows start button and entering "winver" without the quotes and pressing the

Hey Ray, There is absolutely no reason to be sorry, on the contrary, you've been very supportive and helpful from day 1. Also, being able to access again Voyager with the "." doesn't mean that my

Aygen, That's great news that you are running again! I'm sorry if I misled you regarding the Windows Regional Settings. Although you can make changes to the numeric formats there, it requires

Hi Roland. I would really appreciate if you could show the annotation that was discussed to the unguided graphs provided. Thank you. Andrew

By changing the region in W10 (in my case from Switzerland to USA), the settings are being automatically updated and can again use my automation software, i.e. Voyager (comma being replaced by a

Aygen, > I thank you for your support. Funny enough, a friend of mine told me exactly (pretty much) the same, i.e. "you > shouldn't change the commas etc manually...". I have a Windows