Hi Aygen , I just got a chance to review your logs. The problem is the AP V2 ASCOM driver is trying to use a comma as a decimal point, which is producing invalid coordinates in some cases. I am not

Here is a look from the bottom:

A couple days ago I received my AP1100 mount with a LT2APM and 119FSA to mount on my Losmandy FHD tripod. Today, I am assembling the AP1100 on the FHD tripod and I noticed some problems, as the holes

Bruce Donzanti, wearing an orange robe, wrote: Nepal did look interesting in Raiders of the Lost Ark :-). The default version of NINA is free. A very special, extremely expensive version,

I can't stop laughing along with having MORON written on my forehead. I just responded to you in Discord- that fixed the problem. Nepal did look interesting in Raiders of the Lost Ark :-).

My 1200 keeps returning to Park 5 with the CWs up. I reset the location time, which appears to be

Maybe you live in MINUS 81.49 degrees longitude?

Hi Bruce, How is the weather in Nepal these days? ;) In NINA, a north latitude is positive and a west longitude is negative. You note a lat/long of "28.688/81.49" in your message, which would put

Thanks Linwood. I went down your checklist of items and was testing during the day. It is still not slewing to the correct coordinates that I enter. Also, the Sky Atlas is showing the correct

Hi Ray, I am very sorry, my bad. Please find below the requested files. https://www.dropbox.com/s/wxs42bdenxmgc30/ApccZip-AYGEN_ERKASLAN-2021-10-16-184807.zip?dl=0 Thank you for your support. Best

Really impressive. The detail is outstanding. Congratulations Ignacio!

Hi Aygen, Unfortunately, you used the AP V2 Log Zipper and not the APCC log zipper, so there are no APCC logs. So, please use the APCC log zipper to zip the APCC logs. You can run the APCC log

Very happy owner of a Mach1 GTO3 since 2012. That mount honestly never let me down! Since a year it’s permanently placed in my backyard roll-off roof observatory. Where I live light pollution is

Dear Ray, Thank you very much for your quick reply. Below is link to access the files. https://www.dropbox.com/s/lo9lxj6ggq9p6zo/AscomZip-Aygen-2021-10-16-165729.zip?dl=0 In the meantime, I did

Hi Aygen, That error message means that one or both sync coordinates (RA/Dec) have not been received, so the sync cannot be completed. Can you use APCC's Log Zipper utility to create a Zip file

There’s one other possibility: ground motion. cytan Sent from Yahoo Mail for iPad

That’s a wonderfully detailed and deep view of the Helix! Congratulations, Ignacio. Luca

Good morning, Since a fews days I am experiencing an issue and I hope that someone could help me in solving it. I keep having the following error message every time I sending a command to my

Hi Roland/Bruce. The clouds parted for awhile tonight and I was able to capture the following unguided graph from PHD2. I ran calibration and then set the MinMo to 20.0 as suggested and let it run for

Congrats Ignacio!!! 👍🏻👍🏻👍🏻 😎 Pete