|
Re: Unexpected mount movement
There’s one other possibility: ground motion.
cytan
Sent from Yahoo Mail for iPad
There’s one other possibility: ground motion.
cytan
Sent from Yahoo Mail for iPad
|
By
Cheng-Yang Tan
·
#82318
·
|
|
Re: [ap-ug] WoW! Another APOD for Ignacio
That’s a wonderfully detailed and deep view of the Helix!
Congratulations, Ignacio.
Luca
That’s a wonderfully detailed and deep view of the Helix!
Congratulations, Ignacio.
Luca
|
By
Luca Marinelli
·
#82317
·
|
|
VPort2 / Fault / Sync Target: Valid Alt/Az, RA/Dec, HA/Dec has not been received!"
Good morning,
Since a fews days I am experiencing an issue and I hope that someone could help me in solving it. I keep having the following error message every time I sending a command to my
Good morning,
Since a fews days I am experiencing an issue and I hope that someone could help me in solving it. I keep having the following error message every time I sending a command to my
|
By
Erkaslan Aygen
·
#82316
·
|
|
Re: Fine tuning PHD2 settings for 1100 with Encoders
#Guiding
Hi Roland/Bruce.
The clouds parted for awhile tonight and I was able to capture the following unguided graph from PHD2. I ran calibration and then set the MinMo to 20.0 as suggested and let it run for
Hi Roland/Bruce.
The clouds parted for awhile tonight and I was able to capture the following unguided graph from PHD2. I ran calibration and then set the MinMo to 20.0 as suggested and let it run for
|
By
Andrew J
·
#82314
·
|
|
Re: [ap-ug] WoW! Another APOD for Ignacio
Congrats Ignacio!!! 👍🏻👍🏻👍🏻
😎
Pete
Congrats Ignacio!!! 👍🏻👍🏻👍🏻
😎
Pete
|
By
Pete Lardizabal
·
#82313
·
|
|
Re: WoW! Another APOD for Ignacio
On Sat, Oct 16, 2021 at 10:27 AM, Roland Christen wrote:
With his 168mm refractor that I made from some one-off glass I had on hand. Maybe I should make some more of them?Yes, please.
--
On Sat, Oct 16, 2021 at 10:27 AM, Roland Christen wrote:
With his 168mm refractor that I made from some one-off glass I had on hand. Maybe I should make some more of them?Yes, please.
--
|
By
weihaowang
·
#82312
·
|
|
Re: WoW! Another APOD for Ignacio
Why are we even building new space telescopes ? Time to tell the space agencies !
Congratulations Ignacio ! 🤩
Sébastien
De : main@ap-gto.groups.io <main@ap-gto.groups.io> de la part de Roland
Why are we even building new space telescopes ? Time to tell the space agencies !
Congratulations Ignacio ! 🤩
Sébastien
De : main@ap-gto.groups.io <main@ap-gto.groups.io> de la part de Roland
|
By
Sébastien Doré
·
#82311
·
|
|
Re: WoW! Another APOD for Ignacio
Congrats again Ignacio!
By
Eric Weiner
·
#82310
·
|
|
Re: WoW! Another APOD for Ignacio
Wow! This one is incredible.
Congrats Ignacio!
Wow! This one is incredible.
Congrats Ignacio!
|
By
Ram
·
#82309
·
|
|
Re: Unexpected mount movement
It was not likely the mount. Lets assume for a second it is not the mount, what would be next on the list?
Drawtube moving would move the star on the frame as well. Have you looked at that? If so how?
It was not likely the mount. Lets assume for a second it is not the mount, what would be next on the list?
Drawtube moving would move the star on the frame as well. Have you looked at that? If so how?
|
By
Bill Long
·
#82308
·
|
|
Re: Unexpected mount movement
Not a guiding issue as I'm not guiding. Since the absolute encoders didn't log they detected any slew or directed movement, then Ray's theory of slippage of the clutch makes sense. I'm not sure how
Not a guiding issue as I'm not guiding. Since the absolute encoders didn't log they detected any slew or directed movement, then Ray's theory of slippage of the clutch makes sense. I'm not sure how
|
By
Alex
·
#82307
·
|
|
WoW! Another APOD for Ignacio
https://apod.nasa.gov/apod/ap211014.html
With his 168mm refractor that I made from some one-off glass I had on hand. Maybe I should make some more of them?
Anyway, congratulations Ignacio. You are
https://apod.nasa.gov/apod/ap211014.html
With his 168mm refractor that I made from some one-off glass I had on hand. Maybe I should make some more of them?
Anyway, congratulations Ignacio. You are
|
By
Roland Christen
·
#82306
·
|
|
Re: Setting up NINA
Bruce Donzanti wrote:
I set up in NINA for the first time yesterday. I was asked to have NINA sync with the mount or vice vera. I synced NINA to the mount/telescope (AP1100 in park 4). It slewed
Bruce Donzanti wrote:
I set up in NINA for the first time yesterday. I was asked to have NINA sync with the mount or vice vera. I synced NINA to the mount/telescope (AP1100 in park 4). It slewed
|
By
ap@CaptivePhotons.com
·
#82305
·
|
|
Setting up NINA
I set up in NINA for the first time yesterday. I was asked to have NINA sync with the mount or vice vera. I synced NINA to the mount/telescope (AP1100 in park 4). It slewed fine during the day. Now
I set up in NINA for the first time yesterday. I was asked to have NINA sync with the mount or vice vera. I synced NINA to the mount/telescope (AP1100 in park 4). It slewed fine during the day. Now
|
By
Bruce Donzanti
·
#82304
·
|
|
Re: Testing SkyTrack continuous tracking with the Mach2
#Mach2GTO
Hi Brian,
I am working on documentation for the new release. There is an older video on my website that should help. First clear night, I will also make a quick start video.
The most common trouble
Hi Brian,
I am working on documentation for the new release. There is an older video on my website that should help. First clear night, I will also make a quick start video.
The most common trouble
|
By
Brent Boshart
·
#82303
·
Edited
|
|
Re: Testing SkyTrack continuous tracking with the Mach2
#Mach2GTO
I always check my executables before uploading with VirusTotal. There were no detections against all 67 anti-virus vendors.
I always check my executables before uploading with VirusTotal. There were no detections against all 67 anti-virus vendors.
|
By
Brent Boshart
·
#82302
·
|
|
Re: RA Mesh adjustment for 2104 model Mach 1 GTO
No hurry and thanks for excellent explanation.
Peter
No hurry and thanks for excellent explanation.
Peter
|
By
Peter Nagy
·
#82301
·
|
|
Re: RA Mesh adjustment for 2104 model Mach 1 GTO
Yes, it's quite smooth. I don't have any pix at my disposal at the moment, but will dig some up when I get back.
Rolando
Yes, it's quite smooth. I don't have any pix at my disposal at the moment, but will dig some up when I get back.
Rolando
|
By
Roland Christen
·
#82300
·
|
|
Re: Testing SkyTrack continuous tracking with the Mach2
#Mach2GTO
FYI
If you have Norton/Symantec as your virus checker on downloaded files, it will quarantine SkyTrack and flag it as WS.Reputation1. This is NOT an actual virus. This is Norton's designation for a
FYI
If you have Norton/Symantec as your virus checker on downloaded files, it will quarantine SkyTrack and flag it as WS.Reputation1. This is NOT an actual virus. This is Norton's designation for a
|
By
Worsel
·
#82299
·
|
|
Re: RA Mesh adjustment for 2104 model Mach 1 GTO
OK. Without encoders and using spur gears, I assume PE would look somewhat sinusoidal.
Peter
OK. Without encoders and using spur gears, I assume PE would look somewhat sinusoidal.
Peter
|
By
Peter Nagy
·
#82298
·
|