There is a tighter tolerance on coordinates when this checkbox is selected. There is no difference between 1.9.0.7 and 1.9.0.11 behavior in this regard. In fact, the final RA/Dec coordinates are

Rouz, I don’t see any warnings in the log snippet you included. The SLEWUNSAFE commands are normal. A SLEWUNSAFE command is one that APCC should directly execute the slew without having to check

Tom, This indicates the driver had a problem creating an object it needs to use, most likely ASCOM utilities. If the error persists, try rebooting your computer. Maybe there was a disk error

Thanks for confirming, Roberto! -Ray

Park 3 is preferred because it is far away from a counterweight-up position, thus giving more time to stop the mount should something be misconfigured. -Ray

Hi Mike, No, if you don't have the real-time RA dec feature, or if you are not using APPM, you are not affected. The only negative effect of 1.9.0.9 is that APPM waits longer than it previously did

Hi Rouz, Yes, as I mentioned earlier, an extra character in the RA response was causing an error converting RA to a useable value. Thus, even the mount slewed to the proper coordinates, the RA value

1200FSA https://www.astro-physics.com/1612fsa You can mount this to any homemade pier that has a flat top plate or if you go the ATS permanent pier route then this:

Luke I believe an option for you is a company called Dan's Pier Plates. They make them for different high end GEM's to bolt onto permanent piers. You may want to check them out. Fernando

I always remain signed in to my Cloudy Nights account via my smartphone. The classifieds remain visible- never experienced any security breach issues or anything that resembles the CN website being

Warm welcome to the newcomers !!! Good to see AP is looking forward to the future Roger

Ok I just noticed it only appears with " Require high accuracy slews". It takes 15 sec per point. This is with V1.9.0.11. Some points work fine and its only some point that have the warning.

I'll be testing it tonight. Does anyone know where these slew warnings come from: 0392354 2021-09-23 00:06:10.941: Info, ProcessVPortCommand, RX from VPort 1: :APCC,45352,GZ# 0392355 2021-09-23

Great tip, Luca. Thanks! I will take any tips I can get. I am going to need them :)

Warm greetings Amber and Eric!

Hi Aaron, I just connect to the mount via USB so I cannot help you with the WiFi problem. However, you do not want to connect power to the CP5 through the powerpole ports on the mount. Connect the AC

Brand new A-P customer here. I'm sure I'm doing something stupid. Any help is much appreciated. Am installing / setting up the AP V2 driver / APCC Pro for the first time. Also plugging in my Mach2

Welcome to the Team!!! 😎 Pete

No problem, Alan.  Glad to have been some help! - Shane -- Shane Ramotowski kor@... https://www.kor-astro.net

Welcome aboard, One thing about this forum and this company is it we are all in a constant state of learning. Welcome from INdy TJF Mobile