Dean, Thank you for pointing me to the thread on the case topic. I will review it. Shailesh

Michael, If you mean sign up for notification, to this week it is about 3 years. But recall 2020 was pretty much washed out, so technically 2.something years Shailesh

Hello,You did not get this mount directly from us at Astro-Physics. We shipped this mount in February, and we never ship things loosely in the box, so whoever shipped it to you did not pack it

Thank you Howard, I will call you the day after tomorrow. I must drive to the mount location. Kind regards, Horia Von: main@ap-gto.groups.io <main@ap-gto.groups.io> Im Auftrag von Howard

Hi Horia, Please contact me at the AP office number: 815.282.1513 or via email at howard at astro-physics dot com. That is not the way things ship from our factory. Were the packages damaged? Was

Today I got the chance to take my AP1100 mount out of the wrappings and set it up on the pier. The altitude bar was completely loose inside the RA-axis box and managed to produce some deep scars

Always have to be able to change mounts and setups for testing issues that come up. Rolando

I'm hoping my Mach1 will someday grow up to look exactly like your Mach2. There'll likely need to be an exchange of money (does A-P take cryptocurrency yet?) along with some other mundane tasks of

How long did it take from the time you ordered to shipping? Best, Michael

The 1100/1600 encoder mounts use the original park positions based on time. That's because the encoders are attached to the worm wheel, not the output shaft. There was no way to attach any encoders to

Hi, congratulations on the new mount. Search on Mach2 case. Here is a thread from last year that I started on the same topic: https://ap-gto.groups.io/g/main/topic/74420921#70483 -- Dean

Never mind. Only needed with encoders.

I was notified yesterday that my Mach2 is shipping this week. I am excited. I tried unsuccessfully, to find related threads as I am sure this has been asked before, but please indulge. Can one of you

Thanks Ray

Shailesh, > To view the "ProgramData" folder you will need to go to the Windows control panel , select "Appearance and > Personalization", and find the "folder options" dialog. Select the View

Thanks Jim

Here’s the Mach2 with the Meade12-ACF (this is an early version with the smooth glossy tube and the “RC” label). Also attached is a Clement focuser (kinda heavy) , Lumicon GEG with reducer

Roland, Thanks for the quick answer regarding orthogonality not affecting the polar alignment method. This was a bit of a surprise to me but after thinking about it, I think I understand. It

What is that scope and camera combo on the bottom?

Quite the setup. The Mach 2 is an amazingly good performer even under significant load. I personally think it's the best encoder mount on the market in it's price range and it's not even close. Would