Andrea, The logs did not make it. You'll need to create a public download link to the zip file via Dropbox, Google Drive, One Drive, etc. And APCC is compatible with SkyX. Lots of people use APCC

Thanks Linwood, very helpful. Yesterday I was in hurry and very lucky to understand the basics for saving the night, the calibration happened almost by chance as I couldn't find a calibrate button

hi Ray, I sent you the logs in the other thread. The tracking issue started before the modeling. I don't use skyx as planetarium only, but I use skyx camera add on for about everything: -I connect

Hi Ray, thank you I am attaching the zip but I see a number of files. I see it is a big file, please let me know how to send it if attachment doesn't work. Yesterday I had a " panic moment" and

brings to mind a old saying " a picture is worth a thousand words" Jim

Hi, I also have been using ACP with a PierTech ROR but Bob cautioned me at the start to always have the scope below the level of the roof to prevent any disasters (what could go wrong?). This is fail

Was imaging last night with my Mach1/CP4/APCC Pro mount and when it came time for a meridian flip, the flip didn't occur at the time indicated in the NINA sequencer and several minutes later the mount

I’m going to chime in on this one… I know it’s just a joke and honestly I chuckled, but… It’s a proven fact that there are different methods by which people learn the best. Undiagnosed

Andrea Lucchetti wrote: I'll be very grateful if you can share PHD2 settings for AP mounts and Mach2 in particular (algorithm, settings, etc). Also, For NINA Users: -(Dale, if you see the

I was born in the Hocking hills of southern Ohio so I may be a hillbilly, but in my book simplicity=elegance.

I should have mentioned.... I use the APJog Utility to connect to the mount whenever I want to open and maintain a connection independently from MaxIm or any other application like SkyX. So if I

" It would be easy to do an interlock relay that would turn power off to the mount if the enclosure is over the scope, but that seems somewhat brute force and it would make automation a bit more

Hi Andrea, First, tracking quality is independent of whatever planetarium program you are using. However, you don't say that you are doing this, but since you are using SkyX this applies: you should

Hello Rolando, I attended Stellafane during that decade and saw something like you describe. From a stowed position for travel to fully setup, going through the motions it reminded me of a

Even with all of that technology, there would still be many people who wouldn't open the manual to figure out how to unpack it (such as my brother).

Hi Andrea, To answer your question, you should provide the APCC, ASCOM, and APPM logs, and PNT files. You should use APCC's Log Zipper utility, available from APCC's tool menu. Here is a

You may try this: https://interactiveastronomy.com/skyroof.html I've used their equipment for total roof control and it has ASCOM drivers. -- George Prineville, Oregon

Hello, I had to quickly move to NINA because my skyx doesn't cooperate well with APCC Pro after 1.9. I almost used the standard setting in PHD2 and saved the night but guiding was bad. I noticed the

Hello, second post this morning thanks to the good night. I have APCC PRO 1.9.0.5 and Mach2. When slewing or closed looping in skyx the tracking rate increase to a point that a 2 second frame is

Hi, can someone remind me the files needed to "share" the model? I'd like to ask for help here. I've run a small model (20 points in two dec arcs. There are some large value in the est , but the