I just put my mount on my front seat and buckled it in, seriously I did. Also, did the same for C14, no issues. Though, now I have an AP1600 so thats a bit too heavy for either seat. So I have been

Hi Cj, The reason you may not have seen it with another mount is that it requires both the client application (PHD2) and the the ASCOM driver (AP V2) to NOT be .NET Framework applications. That's

Home depot and Lowes have plastic "tool boxes" with wheels that work well, I have also used a large Ice chest, just cut the original packing foam to fit at my age wheels are nice. the adapter sounds

I think you will want to post your message on the AP GTO group. That is where all the mount experts hang out and have the expertise to help you. I am also on there and can help you get started with

Thomas Giannaccini wrote: There is a YouTube video where a user recommends 3 Rigid 22” Progear Toolboxes. 1 for Dec, 1 for RA, 1 for miscellaneous. Looked like a really nice setup. Thanks.

There is a YouTube video where a user recommends 3 Rigid 22” Progear Toolboxes. 1 for Dec, 1 for RA, 1 for miscellaneous. Looked like a really nice setup.

Dean Jacobsen wrote: I’m not sure I would want that mount tumbling around in the cabin of my vehicle in the event of an accident. A rollover accident could be quite interesting if the 1100 were

I’m not sure I would want that mount tumbling around in the cabin of my vehicle in the event of an accident. A rollover accident could be quite interesting if the 1100 were to break free. 🤕

I use a simple, plastic tub. I wrap the declination part in a towel and lay it on the bottom of the tub. I set the RA section to zero degrees latitude. It also gets wrapped in a towel

totally agree Roland. I obviously do not have any issue with image processing and other form of deconvolution. I think that what I was pointing at is that a little bit of degradation in the original

If you want to go “basic”, then the shipping boxes work great and hold up well. I transported my AP900 around in the two shipping boxes in the back of my pickup or the trunk of my car for 8 or 9

I have been looking at various cases people have built, planning what to do, but I had a thought and curious if it's a sane one. I am not hauling this through airports or checking baggage. It will

So Ray are you saying this is an issue of PHD2 coding and therefore operation. It curious that I have never had this on anything but with my Mach 1 with its GTOCP4 controller. thanks cj

I think we're getting far away from what I wrote originally. The issue is that you do your best to get a nice looking image using tricks like I mentioned and disclosing what you did to achieve the

Topical:

That's just three motorcycles coming at you in a rainstorm. Rolando

That's the scope I meant. Rolando

I was thinking along the lines that, taking the "artistic license" to an extreme, one can just paint a picture of a space image with paint or software. I do not disagree with Mr Christen or others.

I recently bought a used AP 1100 GTO with Encoders. I also received a “motor stall” error message tonight which Im starting to think is the real problem. This is a used mount of course. When I

Here is something a little different from a couple nights ago. Three Amazonas geostationary satellites with tracking turned off. Nice round satellites with stars streaking through the image.