The Icron Raven _is_ a good USB 3 option, but the REX remote unit is large (5.4"x9.1"x1.3") and heavy (2.1 lbs). Plus, it has an external power supply with an AC power cord and a 24VDC cable to the

I have another "newbie" question related to APCC: I have been using the GOTO functionality of my keypad to slew to whatever object I want to look at. For those APCC users who do not have or use

Thanks for the tips on USB hubs. I assume that the Icron is a good option. I will have to investigate my options for mounting it on my dovetail plate since it is common to my three different imaging

You can also put a wanted ad for a used CP3 box on Astromart or Cloudy Nights. They come up for sale over there often, around 300 bucks or so. Fernando

There is not a way to do it with the CP3. Roland

I think the only time I hear mine beep is when I confirm a RCAL aka "recalibrate" on an object. Fernando

Hi Khushrow The main board may have come loose from its socket. See this topic: https://ap-gto.groups.io/g/main/topic/83183340#78845 cytan Sent from Yahoo Mail for iPad

I have had my CP4 box for about a year, and have been using it with my 1100GTO with AE. Tonight for the first time I am not able to connect to my CP4, when I plug it into a USB port there is no

I'm a big fan of the Pegasus distribution hubs. I have the advance and Mount it on the OTA. Imaging camera, guidecamera, focuser, filter wheel and dew strap are all powered and/or USB connected for

If I remember correctly it stopped after a battery change and subsequent necessary reload. Maybe I somehow disconnected the audio bit while I was fiddling around inside it.

Jeffc wrote: > I would consider getting something like a UPBV2 (or other powered USB hub) and put it on the OTA. If you swap OTA's frequently, another option is to fasten such a hub to the

I would consider getting something like a UPBV2 (or other powered USB hub) and put it on the OTA. Then plug the imaging camera and guide camera into that hub. This will save one port on the

Two other comments in addition to those who recommend a USB hub to provide more ports. Get a powered hub so the length of the cables is less an issue. Get a hub with more ports that you need...you

Use a USB hub to expand ports. Suggest a USB 3.0 type even for USB 2.0. I've used this for years on 2 different setups:

My keypad is a very early edition, one of the first couple hundred built. It developed a constant beep awhile back so I decided to send it in for a software update, cleaning, new battery, and

Whenever I'm going to make a custom DC power cable, I usually use one of the online wire guage calculators. Enter parameters such as total wire length (there and back), estimated maximum current,

Well, I hate to suggest this but, for me, I can no longer hear the beep due to failing hearing. I need my hearing aids. Jeff

I have noticed that when doing a recalibrate the keypad no longer beeps. Is there a beep on/off function somewhere. If so, I haven’t been able to find it. Geoff

Nice shot David. I have been doing unguided imaging with the Mach2 for more than a year now and I couldn't be happier with the mount and the software tools. The guide scope and guide camera have

Since it could be a while before you could purchase a new mach2, you might look for a used mach1 or 900gto. Both are excellent mounts and will be a huge step up from your cem60. You might find you