Can you post a few pictures from different angles of this scenario? At present, I don't think there is a software solution. You might be able to first slew to park 3 before doing another slew or

Thank you all very much for the kind words. Best, Glenn

Great image Glenn It would be great if you could share some of your processing techniques. I consider myself still in the learning phase and any tips are appreciated. Mike

Woody, Anthony mentioned to me years ago he was working on a tool for the knobs, and with my aging hands, it has been a delight to use. And the price is most reasonable when you consider the

On Sat, Jul 24, 2021 at 05:21 AM, Ray Gralak wrote: Hi Alex, Are the collision zones you mentioned in counterweight-up orcounterweight-down position? It can happen in a counterweight down position.

Jack, That’s a great looking tool. And I thought I knew everything ADM made and sold. Woody

Very well done Glenn! The Mach1 shoulders the 10" nicely. Don Anderson On Saturday, July 24, 2021, 12:13:51 p.m. MDT, Glenn

It wouldn't be too hard to CAD-up and 3D-print a slip-over knob that would allow for some additional hand force to remove a stuck knob that doesn't have the Allen key socket. AP's dovetail lock design

I find that the ADM Rosette Know Hand Tool works well for me: ADM Rosette Knob Hand Tool - TOOL (highpointscientific.com) Yours truly, Jack Jack Huerkamp Jack's Astro Accessories,

I totally agree with Jeff. Sent from my T-Mobile 4G LTE Device

Beautiful

A small strap-wrench would probably also work. They have lots of leverage and the rubber/plastic parts don’t mar the aluminum. But I’m confused. All my AP knobs have a hex socket in the

Just a beautiful image and work. You guys are skilled! Jeff

Really nice Glenn. I like the color treatment, it often gets overprocessed but you did it beautifully -- Brian Brian Valente portfolio brianvalentephotography.com

I also use the grippers to tighten mine. I usually get a good 1/4 turn or more with them. Robert

Hi Gert Out of curiosity what is the part number of your dovetail plate ? The knobs look like those on my DOVE15 which has no hex head bolts in the clamping knobs either. I have had pretty good luck

Using a tool to tighten? You have to be very careful as to not over tighten. A few years ago I acquired a previously owned SB Paramount ME. The owner had mounted a 16inch RCOS on it and had over

The newer ones in the last few years all are tightened with a hex key besides just finger tightening. See their website. David

Thank you, Eric!

Beautiful work, Glenn. Your processing is amazing as well.