Sure. Sounds good. Same here. Mostly enterprise datacenter work here. And over the years I have learned how flakey/buggy the consumer stuff can be (not to mention insecure). If the stack is so

>>>Alternative: Deoxit Gold is a liquid in a tube not spray, and you could use a q-tip to apply ( i agree - i use only the spray on to a q-tip and then apply. -- Brian Brian Valente portfolio

Howdy, I second this. If the RJ-45 contacts need cleaning, it is best to use a q tip with DeOxit cleaner. The connector internals are potted, so you would have avery hard time getting the DeOxit

I was considering that, but wanted to be sure there were no possible issues with the spray possibly entering the CP4. Alternative: Deoxit Gold is a liquid in a tube not spray, and you could use a

You can use anywhere from 12.5 to 18 volts on the 1100 mount. So if you have a variable voltage supply, dial it in to about 14.5 volts. It will work at up to 24 volts but will get quite hot, so it's

what a dream ... fantastic you don't need much equipment , I wish I'll have the chance to get there one time. Andrea

Beautiful images Roland. tony

Forgot to include: The images were shot this evening on our driveway and lanai with my little Sony NEX7 and an inexpensive 12mm wide angle Rokinon lens. Single exposure of 30 seconds at F2.8 for the

Hi Astronuts, I haven't been as active on the groups because Marj and I took a short vacation to Hawaii Island just over a week ago. I will be back in the office early next week. For those who have

Many people have a slow eye-hand response time, so slewing around with the buttons can cause a crash at high rates. Rolando

You can use anywhere from 12.5 to 18 volts on the 1100 mount. So if you have a variable voltage supply, dial it in to about 14.5 volts. It will work at up to 24 volts but will get quite hot, so it's

You are quite right Jerome. This is a potential issue for any mount. It’s all physics. Clear Skies, Marj Christen Astro-Physics 11250 Forest Hills Road Machesney Park, IL 61115 Phone:

I sent you a private response on this. Thanks.

Hi Curtis, You should use the Log Zipper utility, which is available from PEMPro's Wizard's menu. Please include the debug logs, which is an option in the Log Zipper utility. BTW, please make sure

Since they generate heat internally, I would think you could place or wrap them in some kind of insulating material when it gets really cold. Woody

I like to keep my configuration as similar as possible between running at home and running in the field. What I didn’t mention earlier is that the only things that change between the two methods

I'm just trying to find a log for PEMPro. But -- you're right -- I don't use MaxPoint, so I had a mistaken idea about the publisher.

Eric, For the Mach 2, the max slew rate is 1800x, and the max button rate is 1200x. The 1800x button rate is not available on any mount, probably for safety reasons. -Ray

I use Deoxit D5 for electrical contacts https://www.amazon.com/Hosa-D5S-6-DeoxIT-Contact-Cleaner/dp/B00006LVEU -- Brian Brian Valente portfolio brianvalentephotography.com

And when I initialized from the hand controller just now (no power cycle because I didn’t initialize from APCC for those photos) I got the option for 1800 Slew but only 1200 button on the hand