> I have 2 independent imaging systems on my AP110AE that have their own > independent computers. I did this because I have imagers from the same mfg on both > systems and was having serious driver

Based on what just happened to me I am assuming Sky Safari still hasn't fixed this one yet? The mount decided to head for nadir. Thanks

If you have one AP1100 carrying the two imaging systems, you only need meridian limits on one computer – the one controlling the mount. The other computer would have no idea what to do with those

Hi All, I’m having problems with my AP1200. The CP3 is updated. I have a large model that suddenly won’t sync. Tonight, after I slew to Vega it was off by several degrees so I centered it with

Hi All, I have 2 independent imaging systems on my AP110AE that have their own independent computers. I did this because I have imagers from the same mfg on both systems and was having serious driver

It's time we stopped Continental drift... Bryan

Thanks Ray. I will give that a try

Hi Kevin, I have the same type of soil. Small shifts in polar alignment will primarily affect all-sky pointing accuracy. You can recover all-sky pointing accuracy by refining your polar alignment,

That's funny. No. More than zero?

Have you measured the drift due to soil motion? Rolando

I have a pretty big model in APPM and I am semi-permanently mounted. I have the Mach2 on a Losmandy HD tripod on concrete blocks. My dirt/lawn is largely clay, so even though I am well polar aligned,

Thanks Roland.  This is 1/4th the volume that my AP1200 takes in transit! - Shane -- Shane Ramotowski kor@... https://www.kor-astro.net

Yeah, but only if they are really light weight--I won't be putting the counterweight bar in there!  It's already pushing 60 lbs with the Mach2, case, and wood frame... - Shane -- Shane

Very clever. Rolando

Very nice Shane There is even room in there for a few other accessories. Mike

Hi Anthony, I don't know how this groups.io thing works. I only access it thru the web interface, so not email, and therefore I don't have your address. But maybe you can see mine?

Hi all! My Mach2 is finally portable!  I bought a Pelican 1560 case and adapted it to securely hold the Mach2 during

Hi David In my sketch, item C is a custom adapter that I purchased from Precise Parts. On the Precise Parts web site I specified the A-P 92 Stowaway flattener (92FF) on the scope side, and on the

If you have a 3d printer (all ATMs should have one..) it would be easy to build a push to using a Nexus II and a couple of encoders. It has WiFi, is inexpensive and will connect to Sky Safari on an

What would they need signal for? Phone GPS for location and its own internal clock are all that are required.