To add to Ray's post, we had issues with the scope at SRO which was wired (CAT5) but through a switch instead of the direct computer connect. When I discovered this I had the guys at SRO wire the

I expect that many people have seen this already, but to those who have not there is a 400 QMD mount for sale on eBay. The only caveat is that it is a local pickup only in Milpitas, California Mike

Hi Alex, If the mount won't ping, there could be a network or power issue. Are you directly connecting the computer to the mount? Or, is it going through a network router/switch/hub? Try replacing

Ok, I’ve finally have some time to start playing with my new 1100, and I’m having an issue with losing connection with the mount. Everything would be going along, and then the driver starts

Sure thing: The RA axis and CP4 are in the 25” XL #024 : https://condition1.com/products/25in-storage-trunk-ip67 The Dec axis, counterweight shaft and RAPAS are in the 25” XL #289 :

Hi John, Looks like I may have solved this. I checked Windows number format settings and for some reason the decimal separator field was blank. I changed to . (period) and the error does not seem to

Renan, From the screen shot that Steve Wilkins reposted, this looks like it may be an internationalization error between the software and your number entry. If you live in a country that uses

Do you mind sharing the case model on those two? I looked up a couple cases on the Condition1 website but the depth seemed close for the RA. Thanks again Todd

Here is a jpg showing the lat/long error in blue. The elevation is also wrong - was saved as 9m not 90m. Both these errors have been corrected and the site saved, but still show up on reconnecting.

From the version history, it looks like APPM added some command line switches in version 1.7.0.5. Does anyone have a pointer to the list of switches and their definitions? I don't see it in the help

Todd, I travel every time I image, and I'm using two cases from Condition 1 to transport my 1100GTO. They have the pick/pluck foam and are working well so far. I get everything minus the

Yeah it's heavy at 77lbs. Putting the counter weight shaft in the other box lowers the weight to 64lbs...still heavy but manageable.

The original post called for two boxes but since there are one box solutions I’ll leave this rather cost effective solution here. (The downside of this solution is it is a somewhat heavy

THanks Mike. What do you estimate the total weight of that to be? I bet its more than I want to deal with so I would personally rather have two separate cases. If I transport it to the backyard this

My entire mount sans counter weights is within the bottom 2 sections of this Rigid case system. Bottom sections holds RA, DEC and CW shaft.

Image doesn't open. Try Jpeg. Rolando

I get this error: - also the site elevation has one or more added zeroes but is not highlighted in blue De: Steve Wilkins Enviado: martes, 4 de mayo de 2021 10:40 Para:

Do you have a screen shot showing the entry? Rolando

The fact that both RA and Dec are drifting so fast in just a few minute's time indicates either that your polar alignment is way off, or that the object that you are calibrating on is not near the

Anyone striking this error? - On starting the driver, the site latitude and longitude seconds fields are highlighted in blue. - also the site elevation has one or more added zeroes but is not