|
Re: GTOCP4 Caps
What a coincidence ! I also ordered some of the caps from Mouser yesterday. They must think there is a run on the Hirose connectors. I checked the Digi-Key web site that Howard provided the link to,
What a coincidence ! I also ordered some of the caps from Mouser yesterday. They must think there is a run on the Hirose connectors. I checked the Digi-Key web site that Howard provided the link to,
|
By
M Hambrick
·
#78035
·
|
|
Re: AP1100 park position question
List of Linak distributors worldwide
https://www.linak.com/organisation/subsidiaries-distributors/
Bryan
List of Linak distributors worldwide
https://www.linak.com/organisation/subsidiaries-distributors/
Bryan
|
By
Worsel
·
#78034
·
|
|
Re: Interesting Behavior with APCC Pro and Pegasus Astro UPBv2
Regards,
John Fisanotti
By
Fisanotti, John
·
#78033
·
|
|
Re: AP1100 park position question
I believe if you ask them, Linak will give you a list of their distributors.
-Christopher Erickson
Observatory engineer
Waikoloa, HI 96738
www.summitkinetics.com
I believe if you ask them, Linak will give you a list of their distributors.
-Christopher Erickson
Observatory engineer
Waikoloa, HI 96738
www.summitkinetics.com
|
By
Christopher Erickson
·
#78032
·
|
|
Re: GTOCP4 Caps
I ordered the caps from Mouser today.
The 2 large were $13.35 each and the 3 small were $9.60 each. Like 80 in stock of each.
I ordered the caps from Mouser today.
The 2 large were $13.35 each and the 3 small were $9.60 each. Like 80 in stock of each.
|
By
Roger Howard
·
#78031
·
|
|
Re: More APPM Results -- Can Someone Help Me Understand This?
Ray, how do you know when to use APM or UCAC4?
(or a link to info)
Ray, how do you know when to use APM or UCAC4?
(or a link to info)
|
By
Greg McCall
·
#78030
·
|
|
Re: Interesting Behavior with APCC Pro and Pegasus Astro UPBv2
Hi Wade,
You might want to check the PNT file to see if the temperatures were recorded in degrees C instead of degrees F. There will be no obvious sign of the wrong scale except that the values might
Hi Wade,
You might want to check the PNT file to see if the temperatures were recorded in degrees C instead of degrees F. There will be no obvious sign of the wrong scale except that the values might
|
By
Ray Gralak
·
#78029
·
|
|
Re: AP1100 park position question
Thanks for the info Jack. I suspected as much. I checked ebay and they don't show and DL2s right now. I will have to keep my eyes open for one.
Don Anderson
Thanks for the info Jack. I suspected as much. I checked ebay and they don't show and DL2s right now. I will have to keep my eyes open for one.
Don Anderson
|
By
Don Anderson
·
#78028
·
|
|
Re: Interesting Behavior with APCC Pro and Pegasus Astro UPBv2
Thanks for the update on this.
Wow, so I thought they had fixed this in the past because it was reported by some NINA users, then I was informed that Pegasus fixed it. I guess not. I run my own gear
Thanks for the update on this.
Wow, so I thought they had fixed this in the past because it was reported by some NINA users, then I was informed that Pegasus fixed it. I guess not. I run my own gear
|
By
Dale Ghent
·
#78027
·
|
|
Re: M 81
I think Kevin's approach is correct for CMOS. I have the 1600MM Pro and there just doesn't seem to be an advantage to long subs, although I've only done one galaxy and it was faint. The integration
I think Kevin's approach is correct for CMOS. I have the 1600MM Pro and there just doesn't seem to be an advantage to long subs, although I've only done one galaxy and it was faint. The integration
|
By
Steven Panish
·
#78026
·
|
|
Re: Strange behavior with Mach 2 and MaximDL auto pier flip
#ASCOM_V2_Driver
#Mach2GTO
#Guiding
I bit the bullet and upgraded a few months ago to the latest Maxim build (now 6.26) from an early version of 6. The quirky guiding issues I had (including the occasional star-faded issue) finally
I bit the bullet and upgraded a few months ago to the latest Maxim build (now 6.26) from an early version of 6. The quirky guiding issues I had (including the occasional star-faded issue) finally
|
By
jaddbd
·
#78025
·
|
|
Re: Interesting Behavior with APCC Pro and Pegasus Astro UPBv2
Yes, drift in the sky is perpendicular to the horizon, but depending on your object's Dec and your location on Earth, the drift can easily be equal in both axes, so resulting in a diagonal drift. Only
Yes, drift in the sky is perpendicular to the horizon, but depending on your object's Dec and your location on Earth, the drift can easily be equal in both axes, so resulting in a diagonal drift. Only
|
By
Roland Christen
·
#78024
·
|
|
Re: Strange behavior with Mach 2 and MaximDL auto pier flip
#ASCOM_V2_Driver
#Mach2GTO
#Guiding
The Mach2 doesn't drift after pier flip, however it would not hurt to try this.
My version of Maxim6 is buggy in several ways also and at times it won't automatically change the pier side (sometimes
The Mach2 doesn't drift after pier flip, however it would not hurt to try this.
My version of Maxim6 is buggy in several ways also and at times it won't automatically change the pier side (sometimes
|
By
Roland Christen
·
#78023
·
|
|
Re: Interesting Behavior with APCC Pro and Pegasus Astro UPBv2
I wanted to revisit this topic with an update.
I reached out to Pegasus Astro, and they are aware of the issue with unit in the temperature value. At this time, they can’t fix it because SGP
I wanted to revisit this topic with an update.
I reached out to Pegasus Astro, and they are aware of the issue with unit in the temperature value. At this time, they can’t fix it because SGP
|
By
W Hilmo
·
#78022
·
|
|
Re: Strange behavior with Mach 2 and MaximDL auto pier flip
#ASCOM_V2_Driver
#Mach2GTO
#Guiding
Try the adaptive check box under the guiding/advanced, pier flip. This fixed it for me. When it flips, it will sometimes drift out for 20 arcsecs or so, then figures out that it is going the wrong
Try the adaptive check box under the guiding/advanced, pier flip. This fixed it for me. When it flips, it will sometimes drift out for 20 arcsecs or so, then figures out that it is going the wrong
|
By
jaddbd
·
#78021
·
|
|
Strange behavior with Mach 2 and MaximDL auto pier flip
#ASCOM_V2_Driver
#Mach2GTO
#Guiding
I'm experiencing a strange problem that's driving me bonkers.
Just for background, and to assure folks that I'm not a complete novice with these issues, please note that I use the same setup on
I'm experiencing a strange problem that's driving me bonkers.
Just for background, and to assure folks that I'm not a complete novice with these issues, please note that I use the same setup on
|
By
Bradley Rode
·
#78020
·
|
|
Re: Powering Remote Imaging Systems
it's an internal drive.
I forget exactly how we configured it, but OnLogic has people you can email/call and they are really helpful. I think we just told them what we wanted and they made
it's an internal drive.
I forget exactly how we configured it, but OnLogic has people you can email/call and they are really helpful. I think we just told them what we wanted and they made
|
By
Brian Valente
·
#78019
·
|
|
Re: Powering Remote Imaging Systems
Thanks Brian,
Is your 2nd drive internal or external? That’s what was confusing me at 1st, where is the data drive located because not all of their systems have a 2nd drive option.
-Steve
Thanks Brian,
Is your 2nd drive internal or external? That’s what was confusing me at 1st, where is the data drive located because not all of their systems have a 2nd drive option.
-Steve
|
By
Steve Reilly
·
#78018
·
|
|
Re: Powering Remote Imaging Systems
My setup is a 256gb M2 for boot drive, and 1tb SSD for imaging drive.
I use Dropbox to automagically send my lights to me as they are saved, and the next morning i move them out of dropbox.
So far
My setup is a 256gb M2 for boot drive, and 1tb SSD for imaging drive.
I use Dropbox to automagically send my lights to me as they are saved, and the next morning i move them out of dropbox.
So far
|
By
Brian Valente
·
#78017
·
|
|
Re: Powering Remote Imaging Systems
So now that I’m really looking at these I see that some models have secondary HD capability via M.2 which others don’t. So how are you handling image storage on these, external drives? When I
So now that I’m really looking at these I see that some models have secondary HD capability via M.2 which others don’t. So how are you handling image storage on these, external drives? When I
|
By
Steve Reilly
·
#78016
·
|