Hi Bruce we do only unguided on our 1600ae with CDK17 at ~3000mm focal length/ 0.63" image scale. For us the model is essential to do unguiding. here's an example:

Thank you all for the feedback. I am doing OAG now and can easily get good tracking and round stars up to 5 minutes but the guiding can be finicky at times. So, it is a thought to try but I will

That’s good news, Wayne. We highly recommend that everyone write pertinent details on the first page of your mount manual, such as the serial number and license keys. Just another place you can

It’s worth a try, but there is no guarantee. I have an EdgeHD 8, and I have to use an OAG. I tried “locking” the primary mirror. The clutches on the EdgeHD scopes are not actually locks.

All taken care of - twice! The office didn’t have the old key but Daleen and Paige sent me the one for my Mach2. You just have to register the mount. I then found an email conversation I had with

Hey that’s right. I should have got a new one with my Mach2. Didn’t really look, but I’ll check with the documentation

I should get one with my mach2 gto right? Is it in the manual packet?

Wayne, Contact our office. We may have it on file. Everyone…it is VERY IMPORTANT to save a copy of your APCC license key in several backed-up places! Regards, George George

Fwiw, a bit tangential, but to the point of long FL uguided imaging…. I did a backyard test recently of a Meade 12” ACF at f6.7 (2040mm FL) (with clement focuser and robofocus) on the ach2. I

Hi, yes, I would start with a three stripe Modell around the target. Grüsse Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

I am once again re-thinking if it makes sense to attempt unguided imaging on my C11" EdgeHD where I have now locked down my primary mirror and upgraded to the Optec FastFocus system where focusing is

CBO are straight shooters.

I’m moving my imaging software to a new computer. I no longer have the email with the license key. Is there a way to recover it, or have it re-sent?

The flattener has been located. Many thanks to the respondent. I'm still in search of the elusive 155TCC. My White Whale, she be!

Agreed. I have had excellent interactions with Company 7 involving both mounts and telescopes. They have also provided me with very helpful technical advice over the years.

I used my Theodolite App on my iPhone to get the horizon altitude every 5-10 degrees for 360 degrees of azimuth. I created a table of the values and would like to create the horizon in APCC PRO on my

Michael, Please email me directly at karen at astro-physics dot com. We’ll get you taken care of. Karen AP

That's funny. Mine also died but I was speculating that it was from the sub-zero freezes we've been having. Contact AP, they took care of me and sent a new one. I did order another from Amazon too as

My 24v power supply that came with the mount died sometime today. My system was set up in the back yard and other than shutting down the laptop, I did not power down anything else. I just threw a

I was more hoping by now a more specific answer was available as I've never seen a manufacturer not have an actual specification for their equipment. Having a 24v system and not allowing for use of a