Last night using my 1200, Planewave 12.5 with an OAG I was getting such high RMS values that I could not take images. The guide star was bouncing all over the place. I checked balance. polar

Firmware is software, so calling it software is fine. :) From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ron Kramer <ronkramer1957@...> Sent: Sunday, January 17, 2021 2:53 PM To:

Thanks so much. I've never really had a problem with it. It has always been a part of my start up routine. I'm going to try this. Appreciate the help:)

IF that wasn't confusing enough. VCP4-E01... I don't know how outdated that is. I look at the link version history and big fixes... Thought it would explain how far out of date I am? E01 is not

I have this warning...see attached. So what is this LATEST firmware version I need? I suspect the number shown is what I already have? looking tor the firmware page to download it.. It says I

Center the double then hit RA/Dec REV button then select 9 Get Outlook for iOS From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of thefamily90 Phillips <thefamily90@...> Sent: Sunday,

Most people use Sync incorrectly. Sync is used only on the initial setup. If you use your Keypad to “GOTO” a double star in the computer and it’s not in the center of the FOV in your eyepiece

Hi. Just wondering if anyone has had problems before with sync not working. My mount wasn't lost. It just wouldn't register the sync. It would beep and show that it was good, but it never took. I

thanks - installing it now. -- Ron Kramer https://www.facebook.com/Ron.R.Kramer

> I have been running the A-P Polar Align version 1.1.62 since I first got my mount and RAPAS in 2018. > Will it continue to work as long as I have this phone, or will there be some point in time at

I have my 14" SCT on a AP1200GTO. It is rock solid. On Sunday, January 17, 2021, 10:59:40 AM MST, Christopher Erickson

I have been running the A-P Polar Align version 1.1.62 since I first got my mount and RAPAS in 2018. Will it continue to work as long as I have this phone, or will there be some point in time at which

The Meade LX200 16" OTA is 65 Lbs dry. 75 with dovetail bars, etc. I have one. It will work on an 1100GTO. I have one of those too. But it will work a LOT better on a 1600GTO. "My advice is always

Eric: I have a Meade 12" f/8 OTA on my AP1100GTO. It is a great combination. However, that OTA only weighs about 50 pounds. Several years ago, I owned a Meade 14" f/10 OTA and it weighed about 65

Honestly, I'd say that OTA is pushing it a bit. It's about 3' long and it's center of mass sits out there quite a bit from the saddle due to its diameter. I'm sure it can "handle" it, but how well

One suggestion: Don't scrimp on counterweights and put them all high up on the shaft, i.e. close to the mount. Bryan

Will my 1100GTO with encoders handle a Meade 16" f10 scope (67 pounds but unknown length)? Anything special I need to do for such a large scope? Eric

I have been using the AP Polar Align for years and it works great. A few years ago I downloaded Polar Scope Align (PSA) (free version) for the skywatcher star adventure pro (for a hawaii trip). I did

Excellent. Thank you! All the best, Chad Andrist

Hi Ray, Good news! It works on APCC std! cytan On Saturday, January 16, 2021, 01:29:43 PM CST, Ray Gralak <groups3@...> wrote: