This is very nice. Congratulations ! Christian Le 27/12/2020 à 15:21, Andrea Lucchetti a écrit :

Hi John, Okay, thanks! I am glad that worked! :-) -Ray Gralak Author of PEMPro Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of Astro-Physics V2

Hi Ray, First, as Roland pointed out, there is a way to do the pier flip from the hand controller. You wrote: Many of the other mount manufacturers have hard pier stops, so they cannot go more than

Hi Mark That will be a very expensive tap since it is not a standard size. I hope you are not asking because the counterweight shaft threads in the Dec axis cap are stripped. If that is the case you

On Sun, Dec 27, 2020 at 10:55 PM, Ray Gralak wrote: It is easy to automate the flip point. You can do this using the AP V2 ASCOM driver (or the hand controller). You can configure the flip-point so

That’s a great image, Joel! Luca

Aloha Ray, Yes sir, that FIXED IT!! Thank you and sorry about all the confusion and trouble! I was logged onto this forum earlier, but missed the '2nd page' Via apcc, after connecting, manual

Very nice indeed. -Steve

beautiful, wow. well done-- Brian Brian Valente portfolio brianvalentephotography.com

Hello friends, I thought I'd share my latest image of van den Bergh 14 and 15 in Camelopardalis. This image was taken with a tandem refractor setup mounted on an AP1100GTO CP4. I was a little

Thank you very much for the diameter and thread pitch! I was hoping to find a tap of the same size; Roland, Howard, or George are invited to comment about this not being an ANSI size? Mark

That’s a beautiful setup and I love the detail and color in the image. Thanks for sharing. Clear skies, Richard — Richard G. Hennig Professor and Alumni Professor of Materials Science and

thank you!

thank you Roland

Thank you for the quick response. Ray, I am using an SW Esprit 100.

No, I'm afraid not. Roland

will the new keypad software work on GOTO CP3 V chip? Don Anderson On Sunday, December 27, 2020, 09:04:33 a.m. MST, Roland Christen

Hi Marcelo, Yes, the temperature can affect both the refraction calculation and the Young modulus (flexure) of an instrument. APCC does account for refraction, but since flexure can also change with

Beautiful image Andrea! Don Anderson On Sunday, December 27, 2020, 08:21:24 a.m. MST, Andrea Lucchetti <andlucchett@...> wrote:

Yes, temperature has a large effect on the modeling. Ray can comment on that, but I have seen this many times myself. Rolando