My goodness, that's nice! Jeff

The color matters based on the sheets from Renishaw. The other point I mentioned, the AE tab in APCC Pro also matters since you won't see that if the personality isn't set correctly.

Hi Khushrow if endorse are on you will see it on the AE Tab like this: to see if the model is active, click on pointing model and look on the options to make sure they are enabled -- Brian Brian

Bill, I don't think the LEDs at the read heads are meaningful. It simply tells you the encoders are powered on but not necessarily enabled. You can power up the mount and the LEDs will still light up

Hi everyone, I wanted to share our latest results from using the our AP1600 with absolute encoders, doing unguided with APCC/APPM model This is from last night's run, we used 900second (15 minute)

Check the lights on the read heads should be blue or green. Check in APCC Pro on the AE tab. If you don't see the AE tab you need to contact AP.

I have just upgraded my 1100GTO by adding the absolute encoders and last night I tested it out for the first time. I ran a pointing model, a modest one to start, 33 points. After this I had the

Thanks Ray. I’ll update to the latest version.

Updating to the latest version will fix the issue. -Ray Gralak Author of PEMPro Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of Astro-Physics V2 ASCOM

I am using APCC Pro 1.8.5.1 (8/23/20).

Hi John, What is the exact version of apcc that you are using? The latest versions are 1.8.8.0 (standard) and 1.8.8.3 (pro). -Ray Gralak Author of PEMPro Author of APCC (Astro-Physics Command

👍 Get Outlook for iOS

Ray, I apologize for the interruption but my “Comm Events” indicator has gone pink. When I open it, it reflects that every 3 seconds an error repeats that says “Sent: ‘:m#, Error: The

Congrats Tony! I think Moose needs a custom heated saddle for the Mach 2! 😆 Pete

No, I think Moose bought the mount out of his paper route money. The 1600 was too big for him to handle. Rolando

Roland, I didn't know you guys also sold dogs!?

I guess Little Moose likes the mount Rolando

https://www.youtube.com/watch?v=BRjWX7rna20 I received a couple packages today from AP :) tony

I received good news today. My local dealer now has a Mach2 available for me in his next allotment - perhaps in January he thinks. As soon as it arrives I will start working on the satellite

Hi Alex Make that 3 thumbs up for the Polemaster. Gets you polar aligned in minutes using SharpCap which I think is better than the QHY software. If you want to keep it attached to the 1100GTO like