Hi Ray, http://skywatcher.space/download/Logs.zip Best, Gert

There is a Log Zipper utility that comes with the driver. You can use that to zip the logs and settings files. -Ray Gralak Author of PEMPro Author of APCC (Astro-Physics Command Center):

Hi Ray, Got another recording from the start. This one without com issue. Prev one the PC might ave been in a bad state. https://www.screencast.com/t/DdVfRDdteSuB Is there some debug / log file to

Gert, I just realized you are using a CP3. I don't usually test with old hardware anymore, so if you can reproduce the issue, upload a short ASCOM driver log to the files section, and I'll take a

Hi Gert, The top of the driver is yellow, meaning there are communication errors. That could be what's causing the problem. The driver sets up some parameters near the beginning of the connection and

Hello All, Something went wrong with the AP driver. It moves the mount way too fast. When I move the mount with the keypad at 1x setting it is OK. When I chose the same setting in the driver and click

Hi Curtis, I got your logs, but you didn't include the debug, and ppc files, which I would also like to see. Also, can you provide the ASCOM log files for that time period? You can use the AP V2

I got a few stitches in my head about a year ago from taking the counterweight off a mount that I thought had the clutches secure. Counterweight shaft got me right above the left eyebrow. Oops. b

Yes, we will post the latest version of the keypad next week. Rolando

We have parts for the 92TCC. The only problem was that the last batch of lens barrels had some spots from the anodize sub-contractor. We contacted the dealers who have these on order and told them

I don't think you need to do full sky modeling. Model on the area you wish to image from the POD, and run with that. Seems simpler.

If your dome is automated then no problem. If it is manual then you have to move the done around. If you don't want to move the dome then just run the model in the part of the sky you have

Hi, How does the modeling work with a partial sky view? For example, with a SkyShed pod, you have the half clamshell cutting off a large portion of sky. How does this work?

Hello Marj, will the update for the existing keypad also be aviable then? Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171 1983476

Not likely related at all. Just another anti MS crusade.

Hi Marj, Great, I got used to doing without it, but the fact that it will soon be near my mach2 to also test the specific keypad follow routines. And I can start translating the manual into French.

David, I am doing some final edits to the keypad manual right now. We plan to be shipping the keypad with the new v5 to all Mach2 owners that ordered one next week. We will send an email with

Ok, it's me again. [I started this thread]. I have not heard any news on when the Keypad will be available for delivery. I am aware AP is working on the software instruction manual. AP, do you have

Joe: Mine is Version 1903.

I have had success with the Edge 11HD on both a CGEM (pushing it) and now an AP900. With the OTA's mirror locked and the Moonlite focuser you should be able to get good results.