Hi I tried to order an item from AP website and I cannot choose any other country than US as the destination country for shipping. Is AP currently shipping only to US? Thank you Donghun

I will check for you tomorrow night if you haven’t gotten an answer by then Jerome. -- Dean Jacobsen http://astrophoto.net/wp/ Image Gallery - http://astrophoto.net/wp/image-gallery/ Astrobin -

I'm wondering what other Mach2 users are experiencing with power usage with their mounts. Using a Powerwerx watt meter, I'm seeing about 1.05 amps at 13.8V while tracking, as much as 5.15 amps while

Thank you Geert and Stuart. I was just looking in the wrong place. -- Dean Jacobsen http://astrophoto.net/wp/ Image Gallery - http://astrophoto.net/wp/image-gallery/ Astrobin -

Dean, the check box is in the AP driver not TSX. You tell it to treat SYNC as RCAL. Then you're good to go. Stuart Heggie http://www.stuartheggie.com/ -- Stuart http://www.astrofoto.ca/stuartheggie/

Dean, it is in the AP Driver that you have to click a box to use Sync as Recal. Then it will work from TheSky. Geert Vandenbulcke Op ma 25 mei 2020 om 19:40 schreef Mike Dodd <mike@...>:

I remember that being there too once upon a time. But I can't find it now. So maybe it isn't there in the recent version. -- Dean Jacobsen http://astrophoto.net/wp/ Image Gallery -

It's been a long time since I looked in SkyX, but I believe there's an option to "use recalibrate when Sync is clicked." I suggest you dig deep and see if you can find something along this line. --

I fell silly for asking this question. I have always been a GTO Keypad user and one of the first things that I do when initializing my mount is to slew to a known star, center the star on the imaging

Yes, Max you are running an old version of the driver. The latest current is v5.30.10. Either link will get you to the driver download

Update the ASCOM driver.

I get this when connect to Voyager. If I kill the driver in task manager and reconnect it works fine. Can this be fixed? 1.8.1.1 Version Thanks max

Max, There's not enough information to say. For example, did the failure message come from the driver or PHD2? Was the mount parked or tracking? If the scope is near the pole, RA moves will hardly

PhD guider connects to AP driver ok. When I try to calibrate I started getting a error message that mount did not respond to pulse guiding (failed message). I close PhD then restart and reconnect the

I have yet to take my mount outside. It's been a bad weather holiday weekend, of course. My local club had to cancel its much delayed Spring stargaze/camping trip. But, I've been trying out the new

Hey guys, I did a review of AP's 92mm Stowaway refractor. https://www.youtube.com/watch?v=UOamVLteJSs Have a happy and safe Memorial Day! tony

Great to hear. Many adventures to be had in the future under the stars for sure. 🙂

The mount is a beautiful mount and it worked great on its first night out. Thanks Roland and everyone else at AP. Very well done. -- Dean Jacobsen http://astrophoto.net/wp/ Image Gallery -

This whole data set was taken unguided: https://www.astrobin.com/full/k3gmbi/0/ AG Optical 10" iDK | FLI Ml16200 | AP1100 AE Using my standard 80pt APCC model I always use. Works a charm. I should

Hi Dean, nice curve, but I think it's the least of things with this frame. But "No modeling or other fancy stuff yet.", I personally went for my 130GT without guidance. Frame received Wednesday 6