Ok, great! Thanks all for the information. David

Maybe that's all you need. Rolando

You can download it from here: http://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.1.1.exe For whatever reason, some APCC installs are unable to find the latest updates when "check for

Thanks Roland for the advice. All excellent points. Much appreciated. The through the mount cabling of the Mach2 will be a nice upgrade for me and will open the door to more automation in my

The PE curve will apply to the mount, and has no bearing on what happens to the main scope flexure. By definition the PE curve cannot store flexure and making a PE curve automatically throws out any

Should work fine, IIRC Ray has a special version of PHD just for PEMPro usage.

I think so if you have a good pixel scale. Rolando

Good polar alignment helps a lot. Keeping the tripod/pier low makes for a more stable system. If you have more than 1 main scope, then side by side is more stable than on top of each other, unless the

Hey David, I'm sure you're right to be wondering about the guide scope approach. Have you used this guide scope / main scope together before and confirmed there is no flexure? If you haven't I'd be

Hello All, This may be a silly question, but can I use an ASI 290 mini guide camera (2.9 pixel size) through my guide scope (162 mm focal length) to create a PEM curve for my AP1100 when the day

Thanks Roland, after your advice yesterday I'm not really concerned about guiding settings. My intent was to solicit any general operating tips from users based on their experience. For instance, it

For first time operation of any mount setup, run the Guiding Assistant, get all the data, evaluate it, and set the mount up according to what is recommended by the Guiding assistant. Why futz around

Any operating tips from those of you who have been using your Mach2s for a while now? I know that I need to remember to remove the RAPAS before slewing the mount. Guiding with PHD2 seems to be no

Thanks Ray.

Hi Ray, Do you mind posting here whenever there is an update of APCC? My APCC never informs me when there is an update. (FYI, PemPro, OTOH, always does) Thanks! cytan

Where do you find these versions - 1.8.0.9 and 1.8.0.11? Are they developer versions? All I can find is "APCC Pro - Public Release Version March 7, 2020 APCC Pro v1.8.0.5". EDIT: Never mind,

Why would you not consider the dew shield in the length? For critical imaging application a single *cable* and its location is something considered (not only for snag purposes) so a heavier piece of

I believe I have a fix already, but I need some clear skies to test it. So, hopefully within a few days. -Ray Gralak Author of APCC (Astro-Physics Command Center):

Ray, when do you expect to have a fix?

Hi Bill, If you have a CP3 it's best that you stay with 1.8.0.9 until the next release. In 1.8.1.x a change was made to make the sign of the tracking rates consistent with what external programs